Hydraulic Dredgers





Filters
Search

  • 2018 Ellicott Dragon Series 370-30 10″ Cutter Suction Dredge

    2018 Ellicott Dragon Series 370-30 10″ Cutter Suction Dredge

    • 441,000 USD
    • 240922-DB
    • Location: Georgia

    This 10″ Ellicott cutter suction dredge was completely refurbished in 2018 and has a 30′ cutting depth. Location: Georgia Principal Dimensions and Characteristics Year Refurbished: 2018 Hull Length: 36′ Hull Width: 12′ Dry Weight: 56,000 lbs. Deep: 4′ Draft: 2.7′ Fuel Capacity: 800 Gallons Genset: Kubota 6kw, 8hp Dredge Capacities Cutting Depth: 30′ Dredge Pump…

  • New – 18″ x 18″ Custom Shark Dredge

    New – 18″ x 18″ Custom Shark Dredge

    • 627,000 USD
    • 240913-DB
    • Location: Nicaragua

    This 18″ x 18″ CUSTOM SHARK DREDGE MODEL SH-10300-56D-SP has a minimum digging depth of 5′ and maximum of 56′. Overall length (with ladder) of 112′-4″ and a width (with side tanks) of 29′- 11″. Principal Dimensions and Characteristics Overall length (with ladder) 112′-4″ (34m) Overall width (with side tanks) 29′ – 11″ (9.1 m)…

  • SOLD: Ellicott 370 Dragon Hydraulic Cutter Suction Dredge

    SOLD: Ellicott 370 Dragon Hydraulic Cutter Suction Dredge

    • 603,750 USD
    • 240904-DB
    • Location: Florida

    2002 model. Built longer than full length side tanks to extend the hull to 48′ LOA and 21′ WOA, they connect to the existing hull with Ellicott OEM hook and socket connections at the bottom similar to the 670 model and bolted connections above deck. The perimeter of the deck is fitted with 1.5″ speed…

  • Updated – 406 mm (16-inch) Non Propelled Cutter Suction Dredger (CSD)

    Updated – 406 mm (16-inch) Non Propelled Cutter Suction Dredger (CSD)

    • 211114-DB
    • Location: Mediterranean

    Built in 1998 in France is a non-propelled cutter suction dredger. The dredge pump is a Caterpillar 3508 with 630kw @1800rpm. It has a max drilling depth of 12m and a maximum flow rate for water of 2880m3/hr. The cutter diameter is 1350mm. The deck crane has a capacity of 1.35T and a length of…

  • New – 10″ X 10″ X 30″ Dredge with Metso 10″ X 10″ pump

    New – 10″ X 10″ X 30″ Dredge with Metso 10″ X 10″ pump

    • 108,455 USD
    • 240806-DB
    • Location: Arkansas

    Dredger located in Arkansas just coming out of operation available now. Powered by Cummins KT1150 Diesel engine hydraulic power pack driven by a Cummins 855 diesel engine to operate deck winches and cutter head 40′ ladder with 36″ cutter head spud holders (No Spuds) enclosed cab to include gauge package and vacuum gauge (+/-) 400′…

  • New – 1984 Ellicott 370 Dragon Cutter Suction Dredger

    New – 1984 Ellicott 370 Dragon Cutter Suction Dredger

    • 162,750 USD
    • 240805-DB
    • Location: Northwest

    Built in 1984. Rebuilt pump with low hours. Everything works.  Cab and controls need to be rebuilt and modernized. Used for dredging marinas, lakes and rivers, channels, canals, sand mining, more. Location: Northwest, USA Principal Dimensions and Characteristics Discharge Size: 12″ x 10″ All details on these pages are given in good faith and are…

  • Updated Price – 16-inch Cutter Suction Dredge (CSD) IHC Beaver 40

    Updated Price – 16-inch Cutter Suction Dredge (CSD) IHC Beaver 40

    • 1,500,000 USD
    • 220210-DB
    • Location: Malaysia

    IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of 955 mm.…

  • New – Sinaloa Cutter Suction Dredge

    New – Sinaloa Cutter Suction Dredge

    • 1,030,000 USD
    • 240802-DB
    • Location: Nicaragua

    Built in 1980 in the USA. Location: Nicaragua General Information   Built By: AMMCO (USA)   Year Built: 1980   Flag: Mexico   Classification: No Dimensions and Characteristics   Length Over All: 35.71 m   Beam: 18 m   Depth Molded: 1.80 m Dredge   Max Dredging Depth: 13.35 m   Min Dredging Depth: 2…

  • Sold – 8-inch Swinging Ladder Cutter Suction Dredge – Ellicott 300 SL

    Sold – 8-inch Swinging Ladder Cutter Suction Dredge – Ellicott 300 SL

    • 217,000 USD
    • 230703-DB
    • Location: Florida

    Built in 2009 and purchased new in 2011. Highly portable swing ladder designed to work in narrow channels and small projects. One truck transportable. Maximum dredging depth of 15-ft and min depth of 2-ft 4-in. Width of cut at depth of 15-ft is 18-ft 3-in and at depth of 2-ft 4-in is 22-ft. Powered by…

  • SOLD – 20 inch Ellicott Dredge 1870

    SOLD – 20 inch Ellicott Dredge 1870

    • 3,077,000 USD
    • 221108-DB
    • Location: Virginia

    Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…

  • 18-inch Cutter Suction Dredger

    18-inch Cutter Suction Dredger

    • 580,250 USD
    • 220905-DB
    • Location: Bangladesh

    Includes 18-inch Cutter suction Dredger, workboat, house boat, pipes and floaters. Running hours is approximately 18,000 hours. The dredger was built in 2017. It has a length overall of 22.78 m and a breadth of 8.25 m. Draft loaded is 0.84 m. Dry weight is 60 TON. Max. dredging depth is 15 m. Production capacity…

  • 850 mm (34-inch) Cutter Suction Dredger

    850 mm (34-inch) Cutter Suction Dredger

    • 30,000,000 USD
    • 221007-DB

    Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…

  • 750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600

    750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600

    • 1,330,000 USD
    • 220802-DB
    • Location: China

    The dredger is a dismountable cutter suction dredger and non-propelled and equipped with an anchor boom installation. The hull consists of six pontoons designed for simple and quick assembly and dismantling. The cutter is driven by slow-running hydraulic motors. The two spuds are each operated by means of a hydraulic ram. All winches are driven…

  • 16-inch Cutter Suction Dredger NEW construction

    16-inch Cutter Suction Dredger NEW construction

    • 220609-DH
    • Location: Estonia

    The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…

  • 18-inch (450 mm) Cutter Suction Dredger (CSD)

    18-inch (450 mm) Cutter Suction Dredger (CSD)

    • 805,000 EUR
    • 220306-DB
    • Location: Latvia

    The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…

  • SOLD: 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant

    SOLD: 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant

    • 869,000 USD
    • 220402-DB

    The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…

  • Ellicott 1270 – 18-inch Cutter Suction Dredge (CSD)

    Ellicott 1270 – 18-inch Cutter Suction Dredge (CSD)

    • 1,890,000 USD
    • 210903-DB
    • Location: Mexico

    The Ellicott Series 1270 built in 2018 is a non-self-propelled, transportable, hydraulic pipeline, cutterhead dredge. Its prime mover consists of a diesel driven centrifugal dredge pump and a diesel driven hydraulic system which powers the cutter, ladder lifting cylinders, and swing and spud winches. The dredge is fully operational. Service records available. 2 cutter heads…

  • SOLD: 10-inch Discharge Cutter Suction Dredger (CSD)

    SOLD: 10-inch Discharge Cutter Suction Dredger (CSD)

    • 320,000 EUR
    • 201108-DG

    The dredger cannot be sold to a company working in France. Built in 2008 and modified in 2014 with 2 additional pontoons for stability, due to the dredging pipe lengthening modified to increase the dredging depth from 8 to 10 m. For the stability, 2 small pontoons were added. Location: West Mediterranean      …