-
710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
294 hp Single Screw Work Boat
Built in 1969 and in 2016 was rebuilt with 600,000 euros of improvements. The vessel has a free deck area of 72 m2 (86 yd2) and hopper cargo area of 600 tons. Next Dry dock is October 2020 and next Annual Survey is October 2019. It has a Classification of Local Ship Inspectorate Harbor. Flag:…
-
550 hp Multi-Purpose Work Boat For Sale and Charter
This 550 hp Multi-Purpose Work Boat was built in 2005 and it’s Classification Society and Notation is INSB (International Naval Surveys Bureau), Sailing area: Full European up to 20 miles from a safe haven. Flag: Cyprus Located in Northern Europe Principal Dimensions and Characteristics Year Built: 2005 Make/Model: Multicat Classification Society/Notation:…
-
18-foot Deep V HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft 9-in, beam of 7-ft 8-in and a transome height of 23-in. Sides are made from 12-in Round Tube with upper (21 ¾” Total). Hull, floor and bench material thickness is ½” HDPE. Transom and side material is ¾” HDPE. Hull carries a twelve-month warranty…
-
17-foot Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft, beam of 7-ft 6-in, sides 23-in and a transom height of 20-in. Hull, floor and bench material thickness is 3/8” HDPE. Floor/Front platform material is ½” HDPE. Features: Transom material is 3/4″ HDPE, rear transom wells for battery and fuel tank, front platform with…
-
23-foot Flat Bottom HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 3-in, sides 24-in and a transom height of 25-in. Hull, floor and bench material thickness is 3/8” HDPE. Transom material is ¾” HDPE. Cabin and other accessory material are ¼” HDPE. Features recessed transom w/ storage, front platform/storage compartment and rear…
-
900- hp Twin Screw Truckable Tug for Charter
Only used on one project the twin screw tug is powered by 2 Two John Deere 6068AFM85 diesel engines with 2 x 300 hp. Propellers are 34”x18” x 4 blade bronze propellers and has two main steering rudders and four flanking rudders. The tug has 2 bow hand deck winches and push knees 7’-0” above…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
26.6 m Survey and Salvage Boat
Class is currently MCA Cat 2 60 nm Offshore but could be changed to Cat1, up to 150 nm offshore. It is equipped with bow thrusters. It has a reverse osmosis plant, full catering facilities and a full compliment of electronics equipment including Inmarsat. On deck it has a HIAB, survey winch A-Frame and diving…
-
45-foot Twin Propeller Airboat w/ Knuckleboom Crane
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
-
1360 hp Crew Boat Wind Farm Vessel
Built in 2012 and refitted in 2017, this Crew Boat / Wind Farm Vessel has 2 Caterpillar engines with total power of 1360 hp. It’s maximum speed is 25 knots and cruising speed is 22 knots. It has seating for 3 crew members and 12 passengers. It’s Class Society and Notation is MCA Cat2 –…
-
1,658 2014 Multi Purpose Work Boat
This 1,658 2014 Multi Purpose Work Boat was built in 2014 in Spain and its Classification Society and Notation is RINA (Registro Italiano Navale), Unrestricted – C TUG-AUT–UMS. Its next Dry Docking is due in October, 2016, its next Special Survey is due in October, 2019 and the next Annual Survey is due in October,…
-
SOLD: 546 hp Twin Screw Workboat w/ A-frame Hoist
Multicat workboat built in 2014 in Egypt. Class BV Coastal 20 nm offshore. Powered by 2 x Caterpillar 3406 6 cyl with total power of 546 hp. The workboat is 24.0 m in length and has a breadth of 8.0 m. Free deck space is 96 m2. It has an Hydraulic Crane with 4.5 tons…
-
SOLD: 1,070 hp Triple Screw Multicat Type Work Boat
This listing is for a 1,070 hp Triple Screw Multicat Type Work Boat w/ 25-tonne Deck Crane was built in Turkey in 2012 and was renovated in 2018. Its’ Classification Society and Notation is PHRS (Phoenix Register of Shipping). Its’ next Dry Docking and Special Survey is scheduled for January of 2020. Flag: Turkey Location:…
-
SOLD: 4,800 hp Offshore Anchor Handling Supply Tug
This 4,800 hp Offshore Anchor Handling Supply Tug was built in France in 1979 and its Classification Society and Notation is BV (Bureau Veritas) Unrestricted Deep Sea Tug. It’s next Special Survey is due in July, 2018 and its next Annual Survey is due in October, 2016. Flag: Malta Located in East Mediterranean Principal…
-
SOLD: 500 hp Outboard Semi Rigid Zodiac 7530B
This Vessel was built in 2008 in Canada and its Class Notation is Cargo ship 3 rd cat (Division FR222), BV approved vessel with deep V and low center of gravity. Flag: French Located in Europe Principal Dimensions and Characteristics Year Built: 2008 Class Notation: Cargo ship 3 rd cat (Division FR222), BV approved…
-
SOLD: 220 hp Single Screw Multipurpose Work Boat
This 220 hp Single Screw Multipurpose Work Boat was built in 2008 in the Netherlands and its Classification Society is Local Dutch Ship Insp. Class. Its last Dry Docking was in March, 2013, it has new propeller, painting and new wire on spud poles and the next is due in March, 2017. Its next Annual…
-
SOLD: 660 hp Multi Purpose Survey Research Standby Vessel
This Vessel was built to LLOYD’s rules in 1968 in the UK with major conversions in 1988 and 2009 and its Classification Society/Notation is Class DTp VIII (MCA). The autopilot has been upgraded to a 921G with XTE resolution of 1.85m, i.e. autopilot. The unit has been set up for ‘plug & play’ input of…
