Built in 1986 in Japan. This dredger has discharge system of Port/STBD Conveyor Systems (1.7mW x 15.6 mL) x 2 sets. Dredging depth is min -6.0 m – max -18.5 m and a width of 60.0 m. It has 2 spuds that are 1,100 mm diameter and 38.0 mL. GT is 1,939 and NT is 582. Length Overall is 72.46 m, breadth of 14.60m and a draught of 3.0m.
Location: Southeast Asia
| General | ||||
| Year Built / Where Built: | 1986 / Japan | |||
| Registry: | Belize | |||
| Principal Dimensions and Characteristics | ||||
| Length Overall: | 72.46 m | 238-ft | ||
| Length: | 58.0 m | 190-ft | ||
| Breadth: | 14.60 m | 48-ft | ||
| Depth: | 4.5 m | 14.8-ft | ||
| Draught: | 3.0 m | 9.85-ft | ||
| GT/NT: | 1,939 / 582 | |||
| Engines and Machinery | ||||
| Main Engine(Genset): | Yanmar T240L-ST | |||
| Power @ 750 rpm: | 820 KW | 1,100 HP | ||
| Aux Generator No. 1: | Yanmar 6HAL-DTN | |||
| Power: | 150 KW | 201 HP | ||
| Aux Generator No. 2: | Yanmar 4CHL-TNA | |||
| Power: | 60 KW | 80 HP | ||
| Bucket/Dipper Motor: | 450KW/410V/50Hz/3P (DC Motor) | |||
| Swing, Squd Winch: | 55KW/10P/200V with Swing Poles & 55KW/1-P/200V | |||
| Dredging | ||||
| Bucket: | 0.5m3 x 75 units, 800 m3/hr (dry only) * 37 buckets/min | |||
| Dredging Depth: | Min -6.0 m – Max -18.5 m | |||
| Dredging Width: | 60.0 m | 197-ft | ||
| Discharge System: | Port/STBD Conveyor Systems (1.7mW x 15.6 mL) x 2 sets | |||
| Spuds (2) | ||||
| Spud Carriage Type: | 2 | |||
| Diameter: | 1,100 mm | 4.4-inch | ||
| Length: | 38.0 m | 124.7-ft | ||
| Crew | ||||
| Number: | 8 | |||
| Accommodations: | 16 | |||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||