-
18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
Dragflow HY 400B Submersible Pump w/ Cutters
Built in 2014, worked for only one shift then project cancelled. Huge inventory of spare parts including impeller and housing. The pump has a capacity of 1020-1150 m3/h and motor power of 300-410 hp. The main body is spheroidal cast iron GS500 and main shaft is austempering NiCrMo4 Steel. The cutter is a Hydraulic excavator…
-
IMS 1012 Booster Pump
B1012-754 IMS 5003X-03 built in 2008. Has runtime hours of 5,550. Powered by a John Deere 6090 engine with 325 bhp. Dredge pump is a GIW Cast Iron with discharge diameter of 10-in and suction diameter of 12-in. Pump performance is 4,000 gpm (252 liter/sec) @170-ft (51.8 m) TDH (water) @ 884 rpm Can be…
-
12-inch Damien Submersible Pump and Power Unit
Damien DOP PUMP / 3025 with Power Pack. This Pump was built in 2005 and can be coupled to an excavator, crane or A Frame. It can be used as a deep dredging system and can also be coupled to a booster for greater discharge distance. Pontoons included. Location: Mexico …
-
500 hp Dredge Cutterhead Module For 22-inch Dredge
48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA Principal Dimensions and Characteristics Cutter Diameter: 1219 mm 48-inch Hydraulic Gearbox: 373 kW 500 hp All details on these…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid handling…
-
6-inch Dredge Pump, hydraulic driven.
Innovative Material Systems CDH100C dredge pump, Hours: 1,132 on meter, Serial: 1024, Cummins 4BT, Fuel type: Diesel, Inlet/discharge diameter: 6″, (2) pumps, Hydraulic driven, (7) suction pipes, (1) 10′ L, (3) 8′ L, (3) 3′ L, Trailer, 16′ L x 84″ W, Suspension: Spring, Axles: Tandem, Tire size: ST205/75R15, good condition. Location: State of Kansas,…
-
3300 PSI 25 GPM Hydraulic Power Unit (HPU)
This HPU is driven by a Tier 4 Certified JCB Engine. Operating pressure 1200-3300 PSI with a hydraulic flow of 0-52 GPM. Hydraulic tank and diesel tank are both 120 gallons. 4″ x 10″ box tube skid rails & 10″ forklift boots. Fully boxed frame tubing for added protection Location: State of South Carolina, USA…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has a 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid handling…
-
16-inch Maddox Booster Pump
16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA
-
10-inch Booster Pump with Automation Package
The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW…
-
12-inch Submersible Pump with Agitators Dragflow HY 300B
Comes outfitted with a hydraulically driven mechanical agitators, 250 ft of 10 inch fixed HDPE pipe, includes hydraulic power unit and associated controls. Requires misc. riggings and shackles to operate. Location: State of Oregon, USA Principal Dimensions and Characteristics Model: HY 300B (Serial # 2663) Weight: 3542.6 kg 7810 lbs Pump Capacity: 19987 LPM 5280…
-
10-inch Submersible Pump with Agitators Toyo DP-150B
Pump comes outfitted with a jet ring, water supply pump, 2 saddles and a control box, 50 ft of electrical cord and 250 ft of 10 inch fixed HDPE pipe. Location: State of Oregon, USA Principal Dimensions and Characteristics Model: DP-150B-3D1 Outlet: 254 mm 10-in …
-
Excavator Pump Attachment 6-inch Eddy Pumps
Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Principal Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in…
-
Excavator Pump Attachment 10-inch Eddy Pumps
Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition. The attachment is currently set up for a Komatsu 400 excavator. Requires a separate Hydraulic Power Unit…
-
Metso J36 12″ x 12″ Pump
Metso J36 12″ x 12″ Pump Location: State of Nebraska, USA
-
GIW 12″ x 10″ Underwater Pump
GIW 12″ x 10″ Underwater Pump Location: State of Nebraska, USA
