-
Mitsubishi 1100 Kva Genset
Mitsubishi 1100 Kva (883 kw @ 1500 rpm) Model S12H -PTA. Engine hours 50 hours. Manufactured 2017. The Mitsubishi Diesel Engine range is designed to provide premium levels of performance, durability and reliability with ease of maintenance. Unused/ slightly used Location: Vietnam General Information Make/Model: Mitsubishi Model: S12H-PTA Mfg Year: 2017 Engine Type: 4-stroke diesel…
-
Mitsubishi 2000 Kva Genset
Mitsubishi 2000 Kva (1590 kw @ 1500 rpm) Model S16R-PTA. Engine hours 200 hours. Manufactured in 2016, 4 units available. The Mitsubishi Diesel Engine range is designed to provide premium levels of performance, durability and reliability with ease of maintenance. Below are some of the benefits, features and advantages. Price per unit. Unused/ slightly used…
-
MTU 2500 Kva (2100 kw @ 1500 rpm) Genset
3 units x MTU 2500 Kva (2100 kw @ 1500 rpm) model 16V4000G80. Engine hours 300-1200 hours. Manufactured in 2015. New / unused Price per unit. Location: Vietnam General Information Make/Model: MTU Model: 16V4000G80 Mfg Year: 2015 Condition: New/Unused Qty 3 Power 2100 kW Speed 1500 rpm Generator Kohler Model 2000S6-M Power 2500 kVA Voltage…
-
2010 Allied Ho-pac 2300 Rammer Compactor
Ho-Pac compactors used for compacting soil and driving piling, posts, pipe, guardrails posts, and more. Location: Virginia Principal Characteristics Weight: 2,900lbs Carrier Range: 35,000 to 120,000 lbs. Impulse Force: 24,000 lbs. Operating Frequency: 2100 rpm Hydraulic Flow Options: 47 gpm Operating Pressure: 2,200 psi Height: 35″ Compaction Plate Dimensions: 34 x 44 inch Compaction Area:…
-
24-inch Connectra Pipe Fusion Machine 620SC
Connectra 620SC Fusion machine is trailer mounted on 2 axle trailer. The machine can fuse 24-in down to 8-in. It is powered by a 20.0 hp Honda engine. Pipe inserts not included. Machine is in running condition and is being sold “As Is Where Is”. Location: State of Florida , USA Dimensions and Characteristics Make/Model:…
-
165-ton Crane w/ 160-foot Boom America Model 9299
165 ton with 160 feet of 77S Tubular Boom with Hammerhead tip. Independent swing & travel with a N855 Cummins engine. Crane runs and looks good! Bucket listed separately – 3 cu/yd Rock Clamshell Bucket Location: State of Florida, USA Dimensions and Characteristics Year of Build: 1972 Make/Model: Model 9299 American crawler crane…
-
20,000 gallon Fiberglass Storage Tanks (used for Polymer)
There are five (5) 20,000 gallon Fiberglass Storage Tanks (used for Polymer) available for purchase. Location: State of New York, USA Dimensions and Characteristics Description Five (5) Fiberglass Storage Tanks: Size: 4.27 x 5.36 m 14 x 17.6 feet Capacity: 75,708 liters 20,000 gallons Features Fiberglass construction 21 feet (6.40 m)…
-
15 lbs/min Complete Portable Polymer Preparation System
This 15 lbs/min Complete Portable Polymer Preparation System is designed to prepare up to 15 lbs/minute of active polymer in a dry form. The system is installed in three (3) sea containers and is designed to make down polymer at a 0.5% solution into five (5) mixing/aging tanks. The system contains four (4) feed pumps…
-
4 pcs – 6,000 Watt Portable Light Towers, 65 feet-high
4 pcs – 6,000 Watt Portable Light Towers, 65 feet-high. They can be sold separately or together. Location: State of New York, USA Price is for each Dimensions and Characteristics Extended Height: 19.81 m 65 feet Length: 9.94 m 32.6 feet Width: 2.44 m 8 feet Depth: 2.62 m 8.6 feet…
-
1,000 HP Schottel Z-drives reconditioned – 6 available en-block
These 6 reconditioned 1,000 HP steerable Schottel Z-drives are Model SRP 505. All equipment has been stored and packed in certified open top containers for direct delivery worldwide. Located in the Netherlands Price is for total package – en-block: Principal Dimensions and Characteristics 6 Reconditioned Shottel Rudder Propellers SRP 505 Steerable Z-Drives: Type: SCHOTTEL SRP…
-
Triple Drum Skagit Winch Model B-20
This Winch was built in the late 1940’s and has no power currently. It takes 1″ wire cable and has never been used. It needs refurbishing. Location: State of California, USA All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or…
-
2 m (6.5-foot) Belt Press
This 1997 Parkson 2 meter belt press was Refurbished Like New In 2002, and has very low hours since then. It currently has new belts installed. It is situated on a 53′ semi-trailer. The press is set up at a wastewater facility in GA and can be demonstrated. Located in The State of Georgia, USA…
-
Amphibious Undercarriage for 12-14 Tonne Class Excavators
• An amphibious excavator, also known as a marsh buggy, is an excavator specifically designed to maneuver in marshes, swampy areas and soft terrain, as well as to float on water. • The physics behind the amphibious excavator lies in the hermetically sealed pontoons, designed based on Archimedes’ principle. Coupled with its large foot print,…
-
SOLD: Fusion Machine Pipe Inserts for McElroy Trackstar 618
Complete sets of 8” (203mm) IPS, 12”(305 mm) IPS and 14” (355mm) IPS alum inserts that fit McElroy Trackstar #618. Location: State of Texas, USA
-
SOLD: Cat 3516B Marine Gensets (Unused) – 2 available
Offshore Marine Gensets built 2011 but unused and kept in storage for a project which did not materialise. Common applications may include mid-water trawlers, crew boats, ferries, towboats and supply boats. Typical operation ranges from 3000 to 5000 hours per year. Price per unit. Location: Malaysia Principal Dimensions and Characteristics …
-
SOLD: 18-inch Pipe Fusion Machine, McElroy Model 618
The Rolling 618 is designed to fuse 200 to 450mm (8”-18”) polypropylene pipes and fittings. The fusion machine is equipped for 14″ pipe. It has a 4-jaw carriage and is self contained gas powered. The 4-jaw carriage that can be easily removed for fusion operations remote from the vehicle. For installations in limited space, the…