-
1985 Mudcat by Ellicott Machine Corp dredge Model 815
1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA
-
16-inch SDR 17 HDPE Pipe
Quantity Available: 17,050-feet of 16-inch SDR 17 Pipe. New/unused surplus. Location: State of Texas, USA USD $22.35 per foot Principal Dimensions and CharacteristicsMaterial: High Density Polyurethane (Black)Pipe OD (Nominal): 406 mm 16 inchesPipe ID (Nominal): 356 mm 14.005 inchesWall Thickness (Nominal): 24 mm 0.941 inchesWeight Per Foot: 19.55 lbs per footStandard Dimension Ratio: (SDR) 17…
-
10-inch SDR 32.5 HDPE Pipe
Quantity Available: 2,200-feet of 10-inch SDR 32.5 in 50-foot lengths (44 pieces). Location: State of Illinois, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05 mm Pipe ID (Nominal) 10.048-inches 255.22 mm Wall Thickness (Nominal) 0.331-inches 8.407 mm Weight…
-
710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
12-inch SDR 11 Polyurethane Pipe (HDPE, Polypipe)
Quantity Available: 35,000-feet in 50-foot lengths. Pipe has been fused for fresh water service. Sold only by the truckload. Minimum purchase of 2,400 ft (one truck load). Location: State of Texas, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
6-inch SDR 32.5 HDPE Polypipe
Quantity Available: 1,000-feet of 6-inch SDR 32.5 Pipe. 50 pieces in 20-ft lengths with Gheen fittings. Location: State of Illinois, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 6.625-inch 168.275-mm Pipe ID (Nominal) 6.2-inch 157.48 mm Wall Thickness (Nominal) 0.204-inch 5.182…
-
750 mm / 30-inche NEW Surplus HDPE pipe, 16-bar WP
New made in 2022 in Europe. Designed for sand gravel application. Include steel flange and bolts/nuts. 4 pieces each 2000 mm. Free delivery (for all 4 pcs) to any Europe port FOB (2 weeks). Location: Ukraine USD 4,705 per piece Principal Dimensions and Characteristics Length (4 pieces) 2000 mm 6.56-ft DN 750 mm 30-in Working…
-
6-inch Horizontal Cutter Dredger “Dino 6”
This 6-inch Horizontal Cutter Dredger was built in 2013, and has 3600 total runtime hours. It has been modified with longer and wider pontoons, a cab, and a transom which can hold 2 outboard motors. It has a new cutterhead, boom, and cable system that was used on 1 small job after it was installed.…
-
1,200 hp Single Screw Near Shore Towing Tug
Built in 1965 in Sweden. Class Society and Notation is Local Swedish Class Coastal Trade. Powered by 1 x Alpha Seffle 498 VO with total power of 1200 hp. Overall length is 24.60 m, breadth of 7.53 m, depth of 4.3 m and draft of 3.8 m. Accommodation for 5, 1 X 2 persons cabin…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…