This listing is for a 10-inch Swinging Ladder Dredge w/ Traveling Spud that was rebuilt in 2012 and 2016. It has a diesel engine that was also rebuilt in 2016, the Traveling Spud is hydraulically operated and it comes with the following additional equipment:
- 3,000-feet of 12-inch HDPE Pipe
- 1,000-gallon Fuel Barge
- Lowe Dredge Tender Skiff
- Parts Trailer
- Pipeline Floats
- Floating Discharge Rubber Hose
Location: Florida, USA
| Principal Dimensions and Characteristics | ||||
| Year Rebuilt: | 2012 / 2016 | |||
| Length Over All: | 131 m | 40 feet | ||
| Beam: | 72 m | 22 feet | ||
| Draft: | 7 m | 2 feet | ||
| Depth: | 13 m | 4 feet | ||
| Ladder Length: | 11.6 m | 38 feet | ||
| Machinery and Propulsion | ||||
| Main Engine: | ||||
| Make/Model: | Caterpillar / 3408 Diesel | |||
| Runtime Hours: | 1,000 hours | |||
| Clutch: | ||||
| Make/Model: | Twin Disc Power Take-Off | |||
| Reduction Gear: | ||||
| Make/Model: | Falk | |||
| Reduction Ratio: | 2.75:1 | |||
| Tank Capacities | ||||
| Fuel Tank: | 1,893 liters | 500 gallons | ||
| Pumps | ||||
| Booster Pump: | ||||
| Make/Model: | Thomas | |||
| Dimensions: | 254 mm x 305 mm | 10 inches x 12 inches | ||
| Impeller Diameter: | 813 mm | 32 inches | ||
| Impeller Runtime Hours: | 50 hours | |||
| Centrifugal Water Pump: | ||||
| Make/Model: | Goulds | |||
| Dimensions: | 51 mm x 76 mm – 229 mm | 2 inches x 3 inches – 9 inches | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||