This 1,500-tonne Floating Sheer Leg Crane was built in October, 1971 at the Hakodate Dock Co., Ltd in Japan. The barge was docked in 2011 and is not in operation, the hull is in good condition, the hoisting gear system needs to be refurbished and it was last certified 20 years ago with GL (Germanischer Lloyd).
Located in Brazil
| Principal Dimensions and Characteristics | ||||
| Year Built: | 1971 | |||
| Length of Hull: | 80.00 m | 262 feet | ||
| Molded Beam: | 34.00 m | 112 feet | ||
| Molded Depth: | 6.50 m | 21 feet | ||
| Draft Amid Ship (no load): | 2.47 m | 8 feet | ||
| Draft Amid Ship (w/max. load): | 3.00 m | 10 feet | ||
| Displacement (no load): | 6,000 tonnes | |||
| Displacement (max.): | 7,500 tonnes | |||
| Gross Tonnage: | 6,241 tonnes | |||
| Accommodation: | ||||
| Crew: | 15 | |||
| Customers: | 10 | |||
| Fully air conditioned, with catering facilities | ||||
| Tank Capacities | ||||
| Fresh Water: | 2 x 63.28 cubic meters | 83 cubic yards | ||
| Gas Oil: | 2 x 62.71 cubic meters | 82 cubic yards | ||
| Cooling Water: | 2 x 503.38 cubic meters | 658 cubic yards | ||
| Ballast Aft: | 2 x 509.63 cubic meters | 667 cubic yards | ||
| + | 2 x 695.88 cubic meters | 910 cubic yards | ||
| Ballast Forward: | 2 x 756.16 cubic meters | 989 cubic yards | ||
| Crane | ||||
| Type: | Shear leg, twin booms | |||
| Boom Adjustment: | 40 to 75 degrees, variable speed up to 2 degrees/min | |||
| Capacity, Main Hooks: | 2 x 750 tonnes = 1,500 tonnes | |||
| Max. Height under Main Hook | ||||
| (to deck level): | 55.00 m | 180 feet | ||
| Max. Reach at 20 degrees: | 61.40 m | 201 feet | ||
| Max. Reach on Max. Capacity at | ||||
| 60 degrees: | 34.50 m | 113 feet | ||
| Max. Capacity on Max. Reach: | 2 x 200 tonnes = 400 tonnes | |||
| Lift Speed, Main Hooks: | Variable up to 1 m/min. (3 feet/min.) | |||
| Power | ||||
| Main Diesel driven Generators: | 350 kW x 3 | 469 hp x 3 | ||
| Auxiliary Diesel driven Generators: | 150 kW x 1 | 201 hp x 1 | ||
| Emergency/Port Diesel driven | ||||
| Generators: | 75 kW x 1 | 101 hp x 1 | ||
| Electrical System (1): | 440V, 3Ph., 60 Hz / 220V, 3Ph., 60 Hz | |||
| Main Winches Drive: | 2 x E. motors, 440V, | |||
| 300 kW x 2 | 402 hp x 2 | |||
| Boom Winches Drive: | 2 x E. motors, 440V, | |||
| 300 kW x 2 | 402 hp x 2 | |||
| Speed Control: | VFD | |||
| Hydraulic System: | 110 kW x 8 | 148 hp x 8 | ||
| pressure 70 bar | ||||
| Deck Cranes | ||||
| Lifting Capacity: | 7.5 kW x 4 | 10 hp x 4 | ||
| Lifting Speed: | Variable up to 30 m/min. (98 feet/min.) | |||
| Main Mooring & Auxiliary Winches | ||||
| Main Load Winches: | 2 x 52 t x 31 m/min. (102 feet/min.) on 50 mm (2 inches) | |||
| wire cable, electric drive. | ||||
| Boom Positioning Winches: | 2 x 75 t x 22 m/min. (72 feet/min.) on 70 mm (3 inches) | |||
| wire cable, electric drive. | ||||
| Mooring Winches Aft: | 2 x 27 t x 18 m/min. (59 feet/min.) on 40 mm (1.6 inches) | |||
| wire cable, plus 2 x 60 t x 7.5 m/min. (25 feet/min.) on | ||||
| 60 mm chain (2.4 inches), hydraulic drive. | ||||
| Mooring Winches Fwd.: | 2 x 27 t x 18 m/min. (59 feet/min.) on 40 mm (1.6 inches) | |||
| wire cable, hydraulic drive. | ||||
| Maneuvers Winch C. L.: | 1 x 25 t x 25 m/min. (82 feet/min.) on 40 mm (1.6 inches) | |||
| wire cable, hydraulic drive. | ||||
| Maneuvers Winches Fwd.: | 2 x 30 t x 38 m/min. (125 feet/min.) on 40 mm (1.6 inches) | |||
| wire cable, hydraulic drive. | ||||
| Auxiliary Mooring Winches Fwd. Deck: | 6 x 7.5 t x 20 m/min. (66 feet/min.) on 20 mm (0.8 inches) | |||
| wire cable, hydraulic drive. | ||||
| Auxiliary Mooring Winch Aft Deck: | 1 x 7.5 t x 20 m/min. (66 feet/min.) on 20 mm (0.8 inches) | |||
| wire cable, hydraulic drive. | ||||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. | ||||