2,400 hp Single Screw Harbor Tug with FIFI

  • 840,000 EUR
  • 150103-VN

This 2,400 hp Single Screw Harbor Tug with FIFI was built in 2001 in the Netherlands in has a Local Ship Inspectorate Class for Local Harbour waters. The tug is only used for day harbour duties. The tug has no accommodations but can be fitted for 1 x4 bed cabin for an extra cost.

Flag: Netherlands

Location: Europe

Principal Dimensions and Characteristics
  Built Year/Place: 2001/Netherlands
  Hull Material: Steel
  Length Over All: 28.00 m 92 feet
  Beam: 8.55 m 28 feet
  Air Draft: 8.80 m 29 feet
  Molded Draft: 4.14 m 14 feet
  Draft: 3.40 m 11 feet
  Bollard Pull: approx. 32 tons
  Speed (cruising – maximum): 10 knots – 13 knots
    No night accommodation on board (1 x 4 beds cabin could be fitted at extra cost)
    Tug only used for day harbor duties
    Toilet, shower, mess room, storage and galley
Machinery & Propulsion
  Main Engine:
    Make/Model: Wartsila / T6
    Power: 1,790 kW 2,400 hp
  Auxiliary Engines (2):
    Make/Model: Cummins
    Output: 80 kVA x 2
  Generator set can run parallel and take over in case of failure
  Main Propulsion System: Single Screw
    Propellers: 1 x variable pitch propeller
  Bow Thruster: 1,000 kgs hydraulic
  Airdraft: 8.80 m
  Dre2 moulded: 4.14 m
Cargos, Tanks Capacities & Range at Sea
  Deck Area: 40 m2 430 ft2
  Fuel tanks capacity: 40 cubic meters 52 cubic yards
  Fresh Water tanks capacity: 8 cubic meters 10 cubic yards
  Ballast tanks capacity: 14 cubic meters 18 cubic yards
  Daily tank capacity: 2,000 liters 528 gallons
  Lube oil tank capacity: 2,000 liters 528 gallons
  Hydraulic oil tank capacity: 1,000 liters 264 gallons
  Foam tank capacity: 7,000 liters 1,849 gallons
  Dirty oil tank capacity: 2,500 liters 660 gallons
  Black grey tank capacity: 2,500 liters 660 gallons
  Fuel consumptions: 185 gr/Hour/Hp
Deck & Towing, Lifting, Mooring Equipment
  1 x 10 tonne hydraulic deck crane
  1 x towing hook with hydraulic release
Navigation & Radio Equipment
  Comprehensive list of navigation and electronic equipment TBA
Extinguish System
  2 x Extinguish Cummins KTA-19-N4, 750 pk/1,300 cubic meters/hr (1,700 cubic yards/hr) per pump
  1 x Extinguish monitor front 900 cubic meters/hr (1,177 cubic yards/hr)
  2 x Extinguish monitor sides 600 cubic meters/hr (785 cubic yards/hr)
  Fire extinguishers:
  7 cubic meters (9 cubic yards) capacity Foam tank
  Pre-wet system
  Sniffer Dredgers system
  Over pressure breathing air system
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.