Built in 2009 and purchased new in 2011. Highly portable swing ladder designed to work in narrow channels and small projects. One truck transportable. Maximum dredging depth of 15-ft and min depth of 2-ft 4-in. Width of cut at depth of 15-ft is 18-ft 3-in and at depth of 2-ft 4-in is 22-ft. Powered by a 375 hp John Deere Model 9.0L 6090HF070 Turbocharged Diesel Engine. Cutter has 6 blades and is 31.5 in in diameter.
Location: State of Florida, USA
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 17.15 m | 56-ft 6-in | ||
| Width: – Hull Overall: | 3.05 m | 10-ft | ||
| Width: – Shipping Overall: | 3.20 m | 10-ft 6-in | ||
| Height – Overall (without spuds): | 3.5 m | 11-ft 6 1/2-in | ||
| Height – Overall shipping: | 3.05 | 10-ft | ||
| Average Draft (estimated): | 0.70 m | 2-ft 4-in | ||
| Dry Weight: | 23,586 kg | 52,000 lbs | ||
| Fuel Capacity: | 946 ltrs | 250 gallons | ||
| Engine | ||||
| Make / Model: | John Deere Model 9.0L 6090HF070 Turbocharged Diesel Engine – Radiator cooled | |||
| Continuous Power Rating (@2200 RPM): | 280 kW | 375 hp | ||
| Electrical System: | 12V DC | 12V DC | ||
| Additional Info: | Engine Control panel with digital read-outs in operator’s cab. Sound reduction engine enclosure |
|||
| Dredging | ||||
| Dredging Depth (max).: | 4.57 m | 15-ft | ||
| Dredging Depth (min): | 0.70 m | 2-ft 4-in | ||
| Width of Cut @2′-4″ Depth: | 6.7 m | 22-ft | ||
| Width of Cut @15′ Depth: | 5.6 m | 18-ft 3-in | ||
| Cutter | ||||
| Cutter Diameter: | 800 mm | 31.5-in | ||
| Number of Blades: | 6 | 6 | ||
| Shaft Diameter: | 64 mm | 2 1/5-in | ||
| Torque Rating: | 28,576 kg | 63,000 lb-in | ||
| Cutter Power: | 30 kW | 40 hp | ||
| Cutter Force: | 1,814 kg | 4,000 lb | ||
| Ladder | ||||
| Nominal Size: | 152 mm Bore x 762 mm Stroke | 6-in Bore x 30-in Stroke | ||
| Rod Diameter: | 64 mm | 2 1/2-in | ||
| Style: | Connecting Rod Ends | |||
| Kicker Spud Cylinder | ||||
| Nominal Size: | 152 mm Bore x 762 mm Stroke | 6-in Bore x 30-in Stroke | ||
| Rod Diameter: | 64 mm | 2 1/2-in | ||
| Style: | Connecting Rod Ends | |||
| Burst Pressure: | 7,500 PSI | |||
| Rated Operating Pressure: | 2,500 PSI | |||
| Hydraulic Systems: | ||||
| Pump Drive: | Double Pump-Engine Direct Drive | |||
| Circuits-Dredge Pump(Closed Loop): | 4,500 PSI Max. Continuous Rating 5,500 PSI Relief Pressure Setting |
|||
| Circuits-Cutter Head: | 2,500 PSI . Continuous Rating 2,800 PSI Relief Pressure Setting |
|||
| Circuits-Auxiliary: | 2,500 PSI Continuous Rating 2,800 PSI Relief Pressure Setting |
|||
| Circuits Types: | Dredge Pump – Closed loop hydro-transmission Auxiliary Controls – 7 bank proportional directionsl Control valves Cutter proportional directional control valve |
|||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||