This 800 mm (32-inch) Cutter Suction Dredger (CSD) was built in 2009 and its Classification Society and Notation is CCS (China Classification Society), Unrestricted Navigation.
Flag: China
Located China
| Principal Dimensions and Characteristics | ||||
| Year Built: | 2009 | |||
| Classification Society/Notation: |
CCS (China Classification Society), |
|||
| Unrestricted Navigation | ||||
| Length Over All: | 108.00 m | 354 feet | ||
| Length of Hull: | 86.10 m | 282 feet | ||
| Beam: | 18.20 m | 60 feet | ||
| Molded Depth: | 5.20 m | 17 feet | ||
| Design Draft: | 3.70 m | 12 feet | ||
| Dredging Depth: | 6.28 m | 21 feet | ||
| Accommodation: | Crew: 29 | |||
| Inboard Pumps (2) | ||||
| Make/Model: | Kingda / 800WN | |||
| Water Flow: | 12,500 cubic meters/hr x 2 | 16,349 cubic yards/hr x 2 | ||
| Power @ 340 RPM: | 2,750 kW x 2 | 3,688 hp x 2 | ||
| Discharge Diameter: | 800 mm | 32 inches | ||
| Suction Diameter: | 800 mm | 32 inches | ||
| Discharge Distance: | 5-8 km | |||
| Pump Engines (2): | ||||
| Make/Model: | Dahaitsu JP / 6DK36 | |||
| Power @ 600 RPM: |
3,310 kW x 2 |
4,439 hp x 2 | ||
|
Submerge Pump |
||||
| Make/Model: | Kingda / 800WNQ | |||
| Water Flow: | 12,500 cubic meters/hr x 2 | 16,349 cubic yards/hr x 2 | ||
| Power @ 258 RPM: | 1,700 kW | 2,280 hp | ||
| Pump Motor: | ||||
| Power @ 1,000 RPM: |
1,800 kW |
2,414 hp | ||
| Diesel Engine: | ||||
| Make/Model: |
Dalian C.S.R China / 16V240 |
|||
| Power @ 1,000 RPM: |
2,350 kW |
3,151 hp | ||
|
Alternator: |
||||
| Power: |
2,100 kW |
2,816 hp | ||
| Output: | 50 Hz / 6,300 V | |||
|
Hydraulic Station |
||||
|
Diesel Engine: |
||||
| Make/Model: |
Dalian C.S.R China / 16V240 |
|||
| Power @ 1,000 RPM: |
2,350 kW |
3,151 hp | ||
| Generator Set | ||||
| Make/Model: | Cummins Chongqing China / KTA38-G5(M) | |||
| Power: | 800 kW | 1,073 hp | ||
| Output: | 50 Hz / 400 V | |||
|
Harbor Generator: |
||||
| Make/Model: | Cummins Chongqing China / KTA38-G5(M) | |||
| Power: | 800 kW | 1,073 hp | ||
| Output: | 50 Hz / 400 V | |||
| Cutter | ||||
| Power @ 0-22-33 RPM: | 1,100 kW | 1,475 hp | ||
| Cutter Diameter: | 2.33 m | 8 feet | ||
| Crane | ||||
| 20 t x 20 m (66 feet) + 20 t x 28 m (92 feet) + 5 t x 18 m (59 feet) | ||||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. | ||||