B1012-754 IMS 5003X-03 built in 2008. Has runtime hours of 5,550. Powered by a John Deere 6090 engine with 325 bhp. Dredge pump is a GIW Cast Iron with discharge diameter of 10-in and suction diameter of 12-in. Pump performance is 4,000 gpm (252 liter/sec) @170-ft (51.8 m) TDH (water) @ 884 rpm
Can be purchased en bloc with 12-inch Horizontal Cutter Dredge IMS 7012 #220809-DH
Location: State of Louisiana, USA
| Principal Dimensions and Characteristics | ||||
| Year Build: | 2008 | |||
| Length: | 19-ft 5-in | 5.91 m | ||
| Width: | 7-ft 6-in | 2.29 m | ||
| Height: | 8-ft | 2.43 m | ||
| Weight: | 15,700 lbs | 7,120 kg | ||
| Engine | ||||
| Make/Model | John Deere 6090 | |||
| Rate Performance@ 2,200 rpm | 325 bhp | 242 bkW | ||
| Fuel Capacity: | 190 gal | 719 ltrs | ||
| Maximum Fuel Consumption: | 15.9 gal/hr | 60.2 l/hr | ||
| Drive Type: | Belt Drive | |||
| Dredge Pump | ||||
| Type: | GIW Cast Iron | |||
| Discharge Diameter: | 10-in | 254 mm | ||
| Suction Diameter: | 12-in | 304 mm | ||
| Impeller Diameter: | 26-in | 660 mm | ||
| Sphere Passage: | 5-in | 127 mm | ||
| Pump Performance | 4,000 gpm (252 liter/sec) @ 170-ft (51.8 m) TDH (water) @ 884 rpm |
|||
| Construction: | Impeller and volute cast from high chrome Gasite iron | |||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||