2,400 hp Single Screw Harbor Tug with FIFI

  • 840,000 EUR
  • 150103-VN
  • Location: Europe

This 2,400 hp Single Screw Harbor Tug with FIFI was built in 2001 in the Netherlands in has a Local Ship Inspectorate Class for Local Harbor waters. The tug is only used for day harbor duties. The tug has no accommodations but can be fitted for 1 x4 bed cabin for an extra cost.

Flag: Netherlands

Location: Europe

 
Principal Dimensions and Characteristics
Built Year/Place: 2001/Netherlands
Hull Material: Steel
Length Over All: 28.00 m 92 feet
Beam: 8.55 m 28 feet
Air Draft: 8.80 m 29 feet
Molded Draft: 4.14 m 14 feet
Draft: 3.40 m 11 feet
Bollard Pull: approx. 32 tons
Speed (cruising – maximum): 10 knots – 13 knots
Accommodation:
No night accommodation on board (1 x 4 beds cabin could be fitted at extra cost)
Tug only used for day harbor duties
Toilet, shower, mess room, storage and galley
Machinery & Propulsion
Main Engine:
Make/Model: Wartsila / T6
Power: 1,790 kW 2,400 hp
Auxiliary Engines (2):
Make/Model: Cummins
Output: 80 kVA x 2
Generator set can run parallel and take over in case of failure
Main Propulsion System: Single Screw
Propellers: 1 x variable pitch propeller
Bow Thruster: 1,000 kgs hydraulic
Airdraft: 8.80 m
Dre2 moulded: 4.14 m
Cargos, Tanks Capacities & Range at Sea
Deck Area: 40 m2 430 ft2
Fuel tanks capacity: 40 cubic meters 52 cubic yards
Fresh Water tanks capacity: 8 cubic meters 10 cubic yards
Ballast tanks capacity: 14 cubic meters 18 cubic yards
Daily tank capacity: 2,000 liters 528 gallons
Lube oil tank capacity: 2,000 liters 528 gallons
Hydraulic oil tank capacity: 1,000 liters 264 gallons
Foam tank capacity: 7,000 liters 1,849 gallons
Dirty oil tank capacity: 2,500 liters 660 gallons
Black grey tank capacity: 2,500 liters 660 gallons
Fuel consumptions: 185 gr/Hour/Hp
Deck & Towing, Lifting, Mooring Equipment
1 x 10 tonne hydraulic deck crane
1 x towing hook with hydraulic release
Navigation & Radio Equipment
Comprehensive list of navigation and electronic equipment TBA
Extinguish System
2 x Extinguish Cummins KTA-19-N4, 750 pk/1,300 cubic meters/hr (1,700 cubic yards/hr) per pump
1 x Extinguish monitor front 900 cubic meters/hr (1,177 cubic yards/hr)
2 x Extinguish monitor sides 600 cubic meters/hr (785 cubic yards/hr)
Safety
Fire extinguishers:
7 cubic meters (9 cubic yards) capacity Foam tank
Pre-wet system
Sniffer Dredgers system
Over pressure breathing air system
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.