-
1,200 hp Single Screw Near Shore Towing Tug
Built in 1965 in Sweden. Class Society and Notation is Local Swedish Class Coastal Trade. Powered by 1 x Alpha Seffle 498 VO with total power of 1200 hp. Overall length is 24.60 m, breadth of 7.53 m, depth of 4.3 m and draft of 3.8 m. Accommodation for 5, 1 X 2 persons cabin…
-
1650 hp Single Screw Towing Tug
Built in 1977, re-engined in 2000, the single screw tug is classed MCA Cat 2. The tug has a length of 25.28 m, breadth of 8.26 m and depth of 3.8 m. Bollard pull is 19 tonnes. Ballast capacity is 53 m3 The tug is powered by 1 x Caterpillar 35-1 @ 1800 RPM with…
-
2012 hp Single Screw Towing Tug
Built in 1983, in the Italy. The tug has a steel hull and is classed NSB Tug or AH 100AE. It is powered by a Wartsila NOHAB DIESEL with 2012 hp. Cruising speed is 10 knots. Length is 25.05 m, breadth is 24.36 m and depth is 4.0 m. Location: South Europe …
-
720 hp Twin Screw General Purpose Towing Tug
Built in 2023 in Turkey, the tug is powered by 2 x Doosan L126TIH with 720 hp. Gearbox is Dongii DMT 170HL with ratio 4.48:1. Propellers are fixed in Kort nozzle : dia. 1300 mm. Bollard pull is 10T. The tug has a SWL 7.5 T deck winch and a SWL 900 kg @ 8…
-
1000 hp Single Screw Towing Tug
Built in 1966 in Germany, the 1000 hp tug has a static bollard pull of 14 ton at 100% rating. Main engines (2) are Deutz SBA 6M 528. The tug has one towing hook with remote release. Maximum speed is 11 knots and cruising speed is 8 knots. Submersible pumps (3 units) have a total…
-
1300 hp Single Screw Towing Tug
Built in 1995 in the Netherlands. Last dry dock October 2022. Hull blasted and new coated. In 2018 the engines were out of the vessel and completely overhauled. Boat was built for and used by Port of Rotterdam authorities, hence always kept in tip top condition. Tug is powered by 2 x M.T.U. 12V 183…
-
250 hp Single Screw Work Tug, Road Transportable
Built in 1975 in Poland. The tug has a length of 11.20 m, breadth of 2.46 m and draft of 0.96 m. Powered by 1xMAN with 250 hp with max. speed of 7 knots. Bollard Pull if 2.2 Tons. Gearbox is twin disk. Equipment include a 5 T deck winch, a 0.6 T crane, a…
-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 enging…
-
650 hp Twin Screw Work Tug
Nearly new Main Engines: JD 6090 tier 2 with 650hp. Gears and ration: MG 512 and 3:10. The tug has 2 aft winches. It has a length of 42 feet, a beam of 14.2 feet and a depth of 5.7 feet. Fuel capacity is 500 gallons. Location: State of Oregon, USA …
-
NEW 76 HP, 25-foot Tug Boat/Dredge Tender w/ A-frame
Factory built in 2016 but never used. The vessel has 2 side pontoon that are bolt mounted on the side of the hull. The length of the vessel is 24-ft 10-in and width of 13-ft (including side pontoons). The XinHong / XHSJ20-374A-00 winch is hydraulic and has a capacity of 3000 lbs. It has a…
-
73.6 kW Utility Tug
Built in 1996 in the Netherlands, this tug has 1,000 hours of use. It has 73.6 kW @3000 RPM. It is 7340 mm in length and weights 5000 kg. Location: Portugal General Year Built/Location: 1996 / Netherlands Hours of Use: 1,000 h Principal Dimensions and Characteristics Length…
-
2,400 hp Twin Screw Towing Tug
This 2,400 hp Twin Screw Towing Tug was built in 1974 by the Putnam Shipbuilding Corp. in Palatka, Florida. Located in the state of New York, USA Principal Dimensions and Characteristics Year Built: 1974 Length Over All: 28.96 m 95 feet Beam: 8.84 m 29 feet Depth: 3.69 m 12…
-
15 lbs/min Complete Portable Polymer Preparation System
This 15 lbs/min Complete Portable Polymer Preparation System is designed to prepare up to 15 lbs/minute of activepolymer in a dry form. The system is installed in three (3) sea containers and is designed to make down polymer at a 0.5% solution into five (5) mixing/aging tanks. The system contains four (4) feed pumps with…
-
940 hp Tug Boat
This 940 hp Tug Boat was built in 1979 and is used for towing and relining anchors. It’s Classification Society and Notation is PMPC KM*R3, Navigation – coastal. Flag: Russia Located in Russia Principal Dimensions and Characteristics Year Built: 1979 Classification Society/Notation: PMPC KM*R3, Navigation – coastal Length Over All: 18.60…
-
1,000 HP Schottel Z-drives reconditioned – 6 available en-block
These 6 reconditioned 1,000 HP steerable Schottel Z-drives are Model SRP 505. All equipment has been stored and packed in certified open top containers for direct delivery worldwide. Located in the Netherlands Price is for total package – en-block: Principal Dimensions and Characteristics 6 Reconditioned Shottel Rudder Propellers SRP 505 Steerable Z-Drives: …
-
1,200 hp Shallow Draft Tug for Charter in West Africa
This Vessel was built in 2011 in Istanbul, Turkey and its Classification Society / Notation is RINA C+Hull + Mach., Coastal Area. The vessels basic functions are harbor towing, mooring and pushing operations Flag: Nigerian Located in Nigeria Principal Dimensions and Characteristics Year Built: 2011 Classification Society / Notation: RINA C+Hull +…
-
660 hp Multi Purpose Survey Research Standby Vessel
This Vessel was built to LLOYD’s rules in 1968 in the UK with major conversions in 1988 and 2009 and its Classification Society/Notation is Class DTp VIII (MCA). The autopilot has been upgraded to a 921G with XTE resolution of 1.85m, i.e. autopilot. The unit has been set up for ‘plug & play’ input of…
