The booster has only been used on one project. Impeller and volute cast
from high chrome Gasite iron. Discharge diameter is 10-in, suction
diameter is 12-in and sphere passage is 5-in. Pump has about 2000 hours
Can be purchased as a package with
Dredger 200919-DH
Location: State of Florida, USA
| Principal Dimensions and Characteristics | ||||
| Length: | 19-ft 5-in | 5.91 m | ||
| Width: | 7-ft 6-in | 2.29 m | ||
| Height: | 8-ft 0-in | 2.43 m | ||
| Weight: | 15,700 lbs | 7,120 kg | ||
| Engine | ||||
| Model/Make: | John Deere | |||
| Rated Performance @2,200 rpm: | 325 hp | 242 kW | ||
| Fuel Capacity: | 190 gal | 719 liters | ||
| Fuel Consumption (max): | 15.9 gal/hr | 60.2 l/hr | ||
| Pump | ||||
| Model/Make: | GIW | |||
| Discharge Diameter: | 10-in | 254 mm | ||
| Suction Diameter: | 12-in | 304 mm | ||
| Impeller Diameter: | 26-in | 660 mm | ||
| Sphere Passage: | 5-in | 127 mm | ||
| Performance (@884 rpm): | 4,000 gpm @ 170 ft. TDH | 252 liter/sec. @ 51.8 m water | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||