The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW model LCC-M250-660.
Booster is reported to be in very good condition. It was purchased for a specific job, it was never used again. Very low hours and excellent condition.
Location: State of California, USA
| Principal Dimensions and Characteristics | ||||
| Length: | 19-ft 3-in | 5.88 m | ||
| Width: | 7-ft 5-in | 2.29 m | ||
| Height: | 8-ft 0-in | 2.43 m | ||
| Weight: | 13,509 lbs | 6,128 kg | ||
| Engine | ||||
| Model/Make: | John Deere 6090 | |||
| Rated Performance @2,200 rpm: | 325 hp | 242 kW | ||
| Fuel Capacity: | 190 gal | 719 liters | ||
| Fuel Consumption (max): | 15.9 gal/hr | 60.2 l/hr | ||
| Pump | ||||
| Model/Make: | GIW LCC-M250-660 | |||
| Discharge Diameter: | 10-in | 254 mm | ||
| Suction Diameter: | 12-in | 304 mm | ||
| Impeller Diameter: | 26-in | 660 mm | ||
| Sphere Passage: | 5-in | 127 mm | ||
| Performance (@884 rpm): | 4,000 gpm @ 170 ft. TDH | 252 liter/sec. @ 51.8 m water | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||