This is a 10-inch Cutter Suction Dredge The dredge is shop-built. It is in good operating condition. Pump and hydraulics are all in good condition. Dredge is currently in the water, and can be fully demonstrated during inspection.
Location: State of Florida, USA
| Principal Dimensions and Characteristics | ||||
| Length Over All (with Ladder): | 62-ft 6-in | 19 m | ||
| Length of Hull: | 40-ft 2-in | 12.5 m | ||
| Width: | 16-ft 2.5-in | 5 m | ||
| Hull Depth: | 4-ft 2-in | 1.3 m | ||
| Draft With Fuel (Average): | 2-ft 5-in | 0.74 m | ||
| Ladder: | 31-ft | 9.45 m | ||
| Dredging Depth (max): | 28-30-ft | 8.5-9.1 m | ||
| Pump | ||||
| Make/Model: | LSA 36 10*12 | |||
| Power: | 301 hp | 224.5 kW | ||
| Flow: | 4,500 gpm | 1,022 m3/hr | ||
| Engine | ||||
| Primary Power | ||||
| Make / Model: | Cummins NTC 300 Big Cam | |||
| Power @ 1800 RPM: | 300 hp | 224 kW | ||
| Secondary Power | ||||
| Make / Model: | Detroit 4/71 | |||
| Power: | 160 hp | 119 kW | ||
| Cutterhead Module | ||||
| Cutter Drive: | Reggiana Riduttori | |||
| Cutter RPM: | Variable 0 to 60 | |||
| Suction Diameter: | 12-inches | 305 mm | ||
| Discharge Diameter: | 10-inches | 254 mm | ||
| Cutter Diameter: | 36-inches | 914 mm | ||
| Winches | ||||
| Swing Winches (2x) | ||||
| Make / Model: | Tulsa 21 | |||
| Wire Size: | 5/8 in | 16 mm | ||
| Ladder Winches | ||||
| Make / Model: | Tulsa 21 | |||
| Wire Size: | 5/8 in | 16 mm | ||
| Swing Winches (2x) | ||||
| Make / Model: | Tulsa 21 | |||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||