Built in 2018 and has only 3287 hours. Dredging depth max is 22-ft. Pipe diameter is 12-in. The dredge is self-propelled with IMS patented Starwheel Drive. Cutterhead length is 108-in and diameter is 22-in. Total solid capacity is 260 yds3/hr. Nominal pump capacity is 1,033 yds3/hr. It is one truck transportable (fully assembled). Dry weight is 30,445 lbs
Location: State of Indiana, USA
| Principal Dimensions and Characteristics | ||||
| Length: | 12.9 m | 42-ft 2-in | ||
| Width: | 3.4 m | 11-ft 3-in | ||
| Height: | 3.2 m | 15-ft 5-in | ||
| Dry Weight: | 13,180 kg | 30,445 lbs | ||
| Displacement: | 16,780 kg | 37,000 lbs | ||
| Draft: | 760 mm | 30-in | ||
| Engine | ||||
| Type: | John Deere Diesel | |||
| Power @2,300 rpm: | 242 kW | 325 hp | ||
| Fuel Capacity: | 1,135 liters | 300 gal. | ||
| Cutterhead | ||||
| Cutterbar Diameter: | 560 mm | 22-in | ||
| Cutterbar Length: | 2,740 mm | 108-in | ||
| Cutterhead Tip Force: | 9,657 N | 2,171 lbs | ||
| Cutterhead Teeth: | Replaceable hardened steel excavator | |||
| Dredge Pump | ||||
| Type: | GIW LCC-M 8×10 | |||
| Discharge Diameter: | 305 m | 12-in | ||
| Suction Diameter: | 248 m | 9.75-in | ||
| Impeller Diameter: | 489 m | 19.25-in | ||
| Dredging Depth: | 6.7 m | 22-feet | ||
| Sphere Passage: | 152 m | 6-in | ||
| Total Solid Capacity: | 199 m3/hr | 260 yds3/hr | ||
| Nominal Pump Capacity: | 795 m3/hr | 1,033 yds3/hr | ||
| Propulsion | ||||
| Propulsion: | STARWHEEL® Drive Self-Propulsion system | |||
| Speed: | 0 to 15 rpm (STARWHEELS – on surface) 0 to 7 rpm (STARWHEELS) – underwater) 0 to 55 fpm (cable drive) |
|||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. | ||||