12-inch Horizontal Dredge IMS 7012

  • 508,000 USD
  • 230302-DH

IMS model 7012 Horizontal Cutter Dredger built in 2014. Reported to be in good working condition. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge with a dry weight of 47,700 lbs (21,636 kg). Dredging depth is 30-ft using Starwheel Drive System and 32.8 using Cable Drive System. Cutterhead torque is 23,885 in.-lbs. (2,969 N-m) @ 2,500 psi (peak) and Cutterhead tip force is 1,837 lbs. (8,171 N).

Location: India

Principal Dimensions and Characteristics
  Length Over All: 51-feet 5 inches 15.70 m
  Width: 12-feet 3.66 m
  Height: 10-feet 5-inches 13.20 m
  Working Draft: 35-inches 889 mm
  Dry Weight: 47,700 lbs 21,636 kg
International Shipping Dimensions
  Length with Starwheels ™ Removed 49-feet 2 inches 15 m
  Length with Starweel ™ Arms Removed 44-feet 10-inches 13.7 m
  Width: 12-feet 3.66 m
  Height w/ Muffler and Air Cleaner Removed 10-feet 0-inches 13.1 m
  Shipping Weight (est) 47,000 lbs 21,319 kg
Dredging Capacities
  Dredging Depth w/ Starwheel Drive System: 30-feet 9.10 m
  Dredging Depth w/ Cable Drive System: 32.8-feet 10 m
  Width of Cut: 135-inches 3,430 mm
  Nominal Depth of Cut: 26-inches 660 mm
Dredge Pump
  Make: Georgia Iron Works (GIW)
  Suction Diameter: 12-inches 305 mm
  Discharge Diameter: 10-inches 254 mm
  Impeller Diameter: 26-inches 660 mm
  Max. Sphere Passage: 5-inches 127 mm
  Speed (variable): 0-790 rpm  
  Performance (Slurry S.G. 1.25): 5,000 gpm @ 125 TDH 315 L/sec @ 38.1 TDH
  Make / Model: John Deere Diesel / Model 6135 AFM85;
  Type: 6 cylinder 13.5 L
  Horsepower @ 1,900 rpm: 500 hp 373 kW
  Fuel Consumption: 22 gal./hr. 83.3 lit./hr.
  Fuel Tanks Capacity: 400 gal. 1,512 liters
  Self Propelled with IMS Starwheel Drive ™ or Cable System
  Type: Replacable Carbide Steel Teeth
  Cutterbar Diameter 26-inches 660 mm
  Cutterbar Length 135-inches 3,430 mm
  Drive Dual Hydraulic Motors, Direct Drive w/ no gear reduction
  Speed Variable 0 to 60 rpm @2,500 psi
  Cutterhead Torque @ 2500 psi (1,724 bar) 23,885 in-lbs (Peak) 2,969 N-m (Peak)
  Cutterhead Tip Force: 1,837 lbs. 8,171 N
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice