12-inch Horizontal Dredge IMS 7012

  • 361,000 USD
  • 201106-DH

The dredge was used in Florida on a peat bog for all 6,410 hours, so no major wear on the pump or cutter. This unit was repainted and refurbished at IMS’s factory for a total cost of $77,000. Some of the major components replaced included: Both Starwheel gearboxes, hydraulic cylinders, hydraulic valve bank, duocone for pump, hydraulic pumps, hoses, slurry pump hydraulic motor and tri-core hydraulic cooler. (see full Refurbish Parts List).

Location: state of Wisconsin, USA

         
Principal Dimensions and Characteristics
  Length Over All: 51-feet 5 inches 15.70 m
  Width: 12-feet 3.66 m
  Height: 10-feet 5-inches 13.20 m
  Working Draft: 35-inches 889 mm
  Dry Weight: 47,700 lbs 21,636 kg
  Year Built / Where Built: 2016 / USA  
Engine
  Make / Model: John Deere Diesel / 6090HF070
  Type: 6 cylinder, 1205 Liter, Diesel Fuel
  Horsepower @ 2,100 rpm: 445 hp 332 kW
  Fuel Consumption: 20.6 gal./hr. 78 lit./hr.
  Fuel Tanks Capacity: 400 gal. 1,512 liters
Dredging Capacities
  Dredging Depth w/ Starwheel Drive: 30-feet 9.10 m
  Dredging Depth w/ Cable Drive: 32.8-feet 10.0 m
  Width of Cut: 135-inches 3,430 mm
  Nominal Depth of Cut: 26-inches 660 mm
Dredge Pump
  Make: Georgia Iron Works (GIW)
  Suction Diameter: 12-inches 305 mm
  Discharge Diameter: 10-inches 254 mm
  Impeller Diameter: 26-inches 660 mm
  Max. Sphere Passage: 5-inches 127 mm
  Performance (Slurry S.G. 1.25) 5,000 gpm (315 liter/sec.) @ 125 ft. (38.1 m) TDH (slurry s.g.1.25) @ 760 rpm w/ 2,000 ft. (610 m) discharge length
Cutterhead
  Type: Replacable Carbide Steel Teeth
  Cutterbar Diameter 26-inches 660 mm
  Cutterbar Length 135-inches 3,430 mm
  Speed Variable 0 to 60 rpm
  Cutterhead Torque @ 2500 psi (1,724 bar) 23,885 in-lbs (Peak) 2,969 N-m (Peak)
  Cutterhead Tip Force: 1,837 lbs. 8,171 N
         
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice