This 1,200 hp Twin Screw Push Boat was built in 2015 in Turkey and its Classification Society and Notation is BV (Bureau Veritas) Tug Unrest. Nav. A1.
Flag: ST VINCENT & THE GRENADINES
Located in the Mediterranean
| Principal Dimensions and Characteristics | ||||
| Year Built: | 2015 | |||
| Classification Society: | BV (Bureau Veritas), Tug Unrest. Nav. A1 | |||
| Hull Material: | Steel | |||
| Basic Functions: | Towing, Mooring and Pushing Operations | |||
| Length Over All: | 22.00 m | 72 feet | ||
| Beam: | 7.70 m | 25 feet | ||
| Depth: | 3.70 m | 12 feet | ||
| Draft: | 2.20 m | 7 feet | ||
| Gross Tonnage: | 163 tonnes | |||
| Bollard Pull: | 15 tons | |||
| Speed Maximum: | 12 knots | |||
| Speed Cruising: | 9 knots | |||
| Economical Fuel Consump./each Engine: | 55 liters/hr | 15 gallons/hr | ||
| Accommodation: | ||||
| Main Deck: 2 x Single Crew Cabin with WC / Shower | ||||
| 1 x Mess Room / Dining Room – 1 x Galley (oven, deep freezer, etc) | ||||
| Lower Deck: 2 x Double Crew Cabin,1 x Store, 1 x Public WC / Shower | ||||
| Total Accommodation: 6 men | ||||
| Air conditioning, Fully Air conditioned / Split Type | ||||
| Machinery & Propulsion | ||||
| Main Engines (2): | ||||
| Make/Model: | Caterpillar / C18 | |||
| Power @ 1,800 RPM: | 447 kW x 2 | 600 hp x 2 | ||
| Auxiliary Engines (2): | ||||
| Make/Model: | Caterpillar / C4.4 | |||
| Output: | 2 x 65 KVA | |||
| Box Cooler: | VDL Klima Box Cooler, Cooling System for M/E & D/G | |||
| Gear Boxes: | 2 x ZF W650 – Ratio 4.5:1 | |||
| Main Propulsion System: | Twin screw | |||
| Propellers: | 2 x ZF Fixed Pitch Propellers – Dia. 1,500 mm (59 inches) | |||
| Nozzles: | 2 x Kaplan Type Kort Nozzles | |||
| Shaft: | 316 L Stainless Steel with Water Lubricated | |||
| Steering Gear | ||||
| DATA Hydraulic Cylinders | ||||
| 2 x 1,000 tm (35 degree / each) – Driven by Hydraulic Power Pack | ||||
| Remote Controlled by Joystick (Electric) + Hydraulic | ||||
| Cargo & Tanks Capacities | ||||
| Fuel Tanks: | 65 cubic meters | 85 cubic yards | ||
| Fresh Water Tanks: | 11 cubic meters | 14 cubic yards | ||
| Deck Equipment | ||||
| Anchor Windlass: | 2 x Electrical driven windlass, 200 kg / each HHP | |||
| Two (2) Anchors | ||||
| Chain (Q3 type): | 247.5 m / 19 mm | 812 feet /0.75 inches | ||
| Towing Hook: | 1 x DATA DTH 15-30, Quick Release 15 tons towing hook | |||
| Test Load 30 tonnes, Rotating Disc | ||||
| Tugger Winch: | 2 x 2 Tonnes capacity on port and starboard (steel wire) | |||
| Deck Crane: | Hydraulic Knuckle Boom Deck Crane | |||
| Boom at: | 7 m | 23 feet | ||
| Outreach SWL: | 355 kg | |||
| Boom at: | 2.75 m | 9 feet | ||
| Outreach SWL: | 995 kg | |||
| Pumps | ||||
| Bilge & Fire Pump: | 25 cubic meters/hr (33 cubic yards) 30 m (98 feet) total | |||
| head with self priming | ||||
| G.S & Fire Pump: | 25 cubic meters/hr (33 cubic yards) 30 m (98 feet) total | |||
| head with self priming | ||||
| Sewage Pump: | 5 cubic meters/hr (7 cubic yards) 20 m (66 feet) total | |||
| head | ||||
| D/O Transfer Pump | 3 cubic meters/hr (4 cubic yards) 20 m (66 feet) total | |||
| head | ||||
| F/W Booster Set: | 2 x 1 cubic meters/hr (1.3 cubic yards) 20 m (66 feet) | |||
| total head | ||||
| Air Compressor: | 100 liters (26 gallons) capacity compressor will be | |||
| installed to supply service air. | ||||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. | ||||