The dredge hull was built in 1999. The crane was built in the 1960’s and had a complete rebuild 2021 and 2022. The dredge is a conventional configuration, all welded steel construction, single skin, non self-propelled deck barge which is outfitted for dredging operations. The vessel is set up to be worked on (3) spuds, or using the four point anchor mooring system. Max dredging depth reported to be 100’. The crane is a fixed base rotating Clyde model 28-DE-65 diesel electric powered whirley crane. Fitted with (4) tip over roller hooks. Fitted with three section welded boom, consisting of angle chords and tubular lacings. Crane pedestal recently fully renewed, zinc coated only. Buckets include 7CY ANVIL Heavy Duty Digging Bucket, 9CY ERIE Heavy Duty Digging Bucket and a 7CY ANVIL Heavy Duty Digging Bucket.
The dump scow is a conventional configuration, all welded steel construction, non self-propelled split hull dump scow, built and maintained by ABS class requirements for unrestricted service. The hull is conventionally framed and stiffened for type. Machinery deckhouse is found on the aft end of the starboard hull. Power for the hydraulics is provided by a four (4) cylinder Cummins model KTA4 (100HP) diesel engine, coupled to a Denison hydraulic pump with remote control unit.
SALE OUTSIDE OF THE U.S. ONLY. SALE TO THE WEST COAST OR GREAT LAKES MAY BE CONSIDERED WITH RESTRICTIONS.
Location: State of New York, USA
Dredge | ||||
Length: | 48.8 m | 160-ft | ||
Breadth: | 15.85 m | 52-ft | ||
Depth: | 2.6 m | 8.5-ft | ||
GT/NT: | 460/138 | 507/152 | ||
Spuds Port & Starboard | ||||
Length: | 27.4 m | 90-ft | ||
Diameter: | 914 mm | 36-in | ||
Spud Walking | ||||
Length: | 27.4 m | 90-ft | ||
Diameter: | 609 mm | 24-in | ||
Spuds Port & Starboard | ||||
Length: | 12.2 m | 40-ft | ||
Diameter: | 914 mm | 36-in | ||
Spud Walking (winch operated): | ||||
Length: | 12.2 m | 40-ft | ||
Diameter: | 609 mm | 24-in | ||
Generator | ||||
Make: | (2) Magna Plus 433PSL6216 | |||
Powered by: | (2) John Deere 6090HF485 | |||
Air Compressors: | ||||
Make: | (2) Quincy QR370 Air Compressors | |||
Capacities | ||||
Fuel: | 68,137 ltr | 18,000 gal | ||
Day Tank: | 18,927 ltr | 5,000 gal | ||
Lube Tank: | 1,135 ltr | 300 gal | ||
Waste Oil: | 1,135 ltr | 300 gal | ||
Fresh Water: | 3,785 ltr | 1,000 gal | ||
Last Drydocking September 2021. New Anodes – blasted and painted. (All voids and fuel tanks were cleaned & inspected by ABS.) Dredge is Complete with Captains Facility, Mates Shack, Galley and Changing Rooms. MSD System. | ||||
Duty Cycle Crane | ||||
Make/Model: | Clyde 28-DE-65 with Frame 16 Winch | |||
Boom Length: | 27.4 m | 90-ft | ||
Dredging Depth: | 30.48 | 100-ft | ||
Powered by | ||||
Make/Model: | CAT 3512 | |||
Capacity: | 57,600 kg | 125,000 lbs | ||
Cable: | 47 mm | 1.85-in | ||
Buckets: | (1) 7CY ANVIL Heavy Duty Digging Bucket (1) 9CY ERIE Heavy Duty Digging Bucket (1) 7CY ANVIL Heavy Duty Digging Bucket |
|||
Spares: | New Crane Boom House Rollers Torque Convertor Frictions and Brakes for Clyde 16 Winch Frictions and Brakes for Clyde 9 Winch Hydraulic Boom Hoist Winch |
|||
Dump scow | ||||
Length: | 73.15 m | 240-ft | ||
Width: | 16.5 m | 54-ft | ||
Depth: | 607 m | 22-ft | ||
Capacity: | 3058 m3 | 4000 yd3 | ||
Hydraulics powered by: | 4 cylinder Cummins model KTA4 diesel engine | |||
Power: | 100 hp | |||
Hydraulic Pump: | Denison | |||
ABS Dump scow Class and International Load line Certificate valid through September 2025. Last Drydocked September 2020 | ||||
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. |