The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30 rpm is 170 kW (230 hp).
From forward to aft the main pontoon carries: the cutter ladder, the two swing winches and the ladder winch, the operating cabin, the dredge pump with drive and auxiliaries, the auxiliary diesel engine with auxiliaries, two spud hoisting rams and two spuds.
A comprehensive package of spare parts is available for an addition 130,500 EURO.
2000 m of discharge pipe is also available. Price on request.
Location: Italy
| General | ||||
| Build: | 2002 | |||
| Class: | Italian Register | |||
| Principal Dimensions and Characteristics | ||||
| Length overall, ladder up: | 35.80 m | 117.5-ft | ||
| Hull Length incl side pontoons: | 24.00 m | 78.7-ft | ||
| Breadth incl side pontoons: | 7.95 m | 26-ft | ||
| Depth: | 2.46 m | 8.07-ft | ||
| Avg Draft with full fuel bunkers: | 1.50 m | 4.9-ft | ||
| Machinery | ||||
| Diesel Engine | Caterpillar | |||
| Power for drive of dredge pump: | 1566 kW | 2130 hp | ||
| Auxiliary Diesel Engine | ||||
| Power: | 345 kW | 470 hp | ||
| Power at Cutter Shaft @ approx. 30 r.p.m.: | 170 kW | 230 hp | ||
| Dredging | ||||
| Dredging Depth (max): | 16.00 m | 52.5-ft | ||
| Suction Diameter: | 550 mm | 22-inch | ||
| Discharge Diameter Pipe: | 500 mm | 20-inch | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. | ||||