Built in 1989 in Japan. The dredger has 22″(550A) KSP-550SSP/2000rpm pump with a capacity of 4,500 m3/hr. The jetting pump capacity is 270 m3/hr @ 140m (Taiko Kikai 200/150). The jetting pump engine is a Isuzu 154 PS/2,000 rpm. Dredging depth is a min. of less than 3m and max of 50m. The dredge is powered by a Hanshin LH 28G-147 engine with 735 kW @ 370 rpm. The length is 47.59m with a GT of 494 and NT of 148.
Location: Southeast Asia
| General Information | ||||
| Built: | 1989 / Japan | |||
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 47.59 m | 156-ft | ||
| Breadth: | 12.00 m | 40-ft | ||
| Draft: | 2.2 m | 7.2-ft | ||
| GT / NT: | 494 / 148 | |||
| Engines & Generators | ||||
| Main Propulsion: | Hanshin LH 28G-147 | |||
| Power @ 370 rpm: | 735 kW | 1000 hp | ||
| Speed: | 9 knots | |||
| Main/Aux Generator: | Yamar 6KFL-T(185ps) + Taiyo 150KVA x 2 units | |||
| Equipment | ||||
| Sand Pump | ||||
| Make: | Kurimoto | |||
| Power: | Run by 550 hp x 2 units Hydraulic Motors | |||
| Pump Capacity: | 4,500 m3/hr at 20m head, 22″(550A) KSP-550SSP/2000rpm | |||
| Jetting Pump/Engine | ||||
| Capacity: | 270 m3/hr @ 140m (Taiko Kikai 200/150) | |||
| Engine: | Isuzu 154 PS/2,000 rpm | |||
| Dredge | ||||
| Dredging Depth(min): | < 3 m | < 9.8-ft | ||
| Dredging Depth(max): | < 50 m | < 164-ft | ||
| Discharge/Loading | remote control/strainer (Separator/Filtration) | |||
| Operating Crew | ||||
| Crew: | 6/shift | |||
| Accommodations: | 12 | |||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||