This dredger was built in 1977 by I.H.C. Holland and was rebuilt in 1994 and in March, 2009 it has undergone major refurbishment. Its Classification Society is Bureau Veritas, the vessel had a General condition Survey of Non-Classed Vessel (For Navigation License Purpose) on April 16, 2009. This vessel is available for inspection and delivery.
It comes with 650 meters of new floating Pipe, and 1,350 meters of new shore Pipe and also comes with new hose. This pipeline was fabricated in mid 2008 and is in almost new condition.
Located in Pakistan
Price for Dredger: USD $ 3,900,000
Price for Pipes & Rubber Hoses: USD $ 400,000
Also Available for Charter
Under contract until end of March, 2011
Technical Details
| Principal Dimensions and Characteristics | |||
| Hull | |||
| Vessel Developer | IHC Holland | ||
| Year of Built | 1977 / (Rebuilt – 1994) | ||
| Classification Society | BV (Bureau Veritas) | ||
| Length overall | 48.80 m | 160 feet | |
| Breadth | 11.90 m | 39 feet | |
| Depth | 2.85 m | 9.35 feet | |
| GRT / NRT: | 468 / 374 | ||
| LDT (Tons) | 450 Tonnes | ||
| Dredging depth (Max.) | 16.00 m | 52 feet | |
| Accommodation: | Mess Room: 1 / Kitchen: 1 | ||
| Pontoons | |||
| Fore side pontoon: (Stbd) | 196.25 cubic meters | 257 cubic yards | |
| Fore side pontoon: (Port) | 196.25 cubic meters | 257 cubic yards | |
| Aft side pontoon: (Stbd) | 114.19 cubic meters | 149 cubic yards | |
| Aft side pontoon: (Port) | 114.19 cubic meters | 149 cubic yards | |
| Center pontoon: | 254.22 cubic meters | 333 cubic yards | |
| Main Engine (2) | |||
| Make / Model | Caterpillar (USA) D399TA | ||
| Power @1,225 rpm | 2 x 838.13 kW | 2 x 1,125 hp | |
| Auxiliary Engine | |||
| Make / Model | Caterpillar (USA) D399TA | ||
| Power | 838.13 kW | 1,125 hp | |
| Generators (2) | |||
| Make / Model (1) | Perkins | ||
| Power: | 35 KVA; 04 cylinder | ||
| Make / Model (1) | Leyland | ||
| Power: | 65.5 KVA; 06 cylinder | ||
| Dredge Pump | |||
| Main Dredge Pump | |||
| Suction | 700 mm | 28 inches | |
| Discharge | 650 mm | 26 inches | |
| Floating Pipeline: | 650 m | 2,133 feet | |
| Shore Pipeline: | 1,350 m | 4,429 feet | |
| Cutter | |||
| Cutter Power (hp) | 558.75 kW | 750 hp | |
| Navigational Equipment | |||
| VHF – I – Com (IC0M59) | |||
| Gyro Compass – 01 x Gyro (Make – Sperry MK37) | |||
| Magnetic Compass – 01 x LALIZAS (Ritchie) B-5 IW-L | |||
| Echo Sounder – Supertec, Digital Echo (MOdel PA0322) | |||
| Navigational Lights – One (01) set | |||
| Main Fire Fighting & Life Saving Equipment | |||
| Comply with SOLAS and flag country as regards fire- fighting & life saving facilities requirement. | |||
| Portable Fire Extinguisher: 8 x 9 kg CO2 , 4 x 8 kg Dry Powder | |||
| 1 x 45L Foam Fire Extinguisher (cart-pushing) | |||
| Electric Fifi General Pump Power: 36 cbm/ hr. | |||
| Standby Electric Fifi Pump power: 36 cbm/ hr. | |||
| Fuel consumption | |||
| Average is 350 liters/ hour | |||
| Spare Parts List | |||
| PVC Floats (Capsule) Raffay: | 18 | ||
| M.S. Pontoons: | 62 | ||
| Dredge Pump casing: | 2 | ||
| Distance pcs. (M.S.rings): | 4 | ||
| Gland seal housing: | 1 | ||
| Impeller (Dredge pump): | 2 | ||
| Impeller (Dredge pump): | 1 | ||
| Steel wire rope (32mm): | 1 coil | ||
| Gate valve 26″: | 1 | ||
| Ladder holding wire: | 2 | ||
| M.S. BEND 26″ diameter: | 4 – Jan | ||
| M.S. TEE 26″ x 6.00 m: | 1 | ||
| Non Return v/v 26″: | 2 | ||
| Cover plate Dredge pump: | 1 | ||
| Distance pieces 26″: | 2 | ||
| Spud jack (comp.): | 1 | ||
| Spud jack shaft: | 1 | ||
| M.S. pully: | 3 | ||
| Spud cone: | 1 | ||
| Spanner (For Dredge pump): | 1 | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. | |||