8″ Bell 200 Cutterhead Dredge Pump Attachment for Excavator

  • 71,500 USD
  • 260132-CP
  • Location: Florida
Thumbnail
Thumbnail
Thumbnail
Thumbnail

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

Equipment Overview

For sale, Bell 200 8″ hydraulic cutterhead dredge pump attachment for excavators. Rugged Dutch-built excavator-mount pump, ideal for marinas, lakes, and shallow-draft river work.

  • Manufactured in 2023
  • Great condition
  • Only used on one job

The 8″ dredge pump was used on a CAT 336 excavator, but it can use it on a much smaller unit. It was used with both a 300 and a 400 hydraulic power unit for power. If you use it with a larger excavator it may be able to run off the excavator instead of using a HPU. The cutterhead is well made and teeth easy to changeout. The pump was used with both 6″ and 8″ hdpe pipe. It’s quite sturdy. The pump was used on a CAT 336 long reach excavator digging -45’ underwater in a channel for Disney. It’s a well made pump.

Specs

  • Throughput: up to 1,045 yd³/hr slurry (≈ 210 yd³/hr solids)
  • Solids handling: 5 in spherical passage—swallows cobbles, shells, and debris
  • Power: 150 HP hydraulic (fits most 200–330 class excavators or standalone HPU)
  • Weight: ~3,000 lb complete with Bell OEM cutter-head.
  • Size: compact 4 × 3 ft skid; overall height 4 ft with cutter attached
  • Quick-couple 8″ ANSI/HDPE discharge; 3,600 psi rated
  • Made to bolt straight onto Cat 320 – 336 sticks—no custom brackets
  • Ships on a standard 20-ft trailer, under 3,500 lb., no oversize permit
  • Proven on Gulf-Coast silt, sand, and oyster-shell jobs; spares stocked in Jacksonville & Houston
  • Interchangeable heads (auger, sand, double-cutter) available from Bell USA
  • Perfect upgrade from 6″ submersibles when you need real production without jumping to a 10″ system
  • Max mixture capacity 800 m³/h (≈ 1,046 yd³/h) (Bell Dredging Pumps)
  • Max impeller speed 1,200 rpm
  • Max power at shaft 110 kW (≈ 150 hp)
  • Suction bore Ø 200 mm (8″)
  • Discharge piping Ø 200 mm (8″) (Studocu)
  • Spherical passage (max round solids) 125 mm (5″) (hitech-piling.it)
  • Weight (hydraulic, without head) 1,200 kg (≈ 2,645 lbs)
  • Weight (electric, without head) 1,900 kg (≈ 4,188 lbs)
  • Max hydraulic pressure 250 bar (≈ 3,625 psi)
  • Hydraulic pump flow 290 L/min (≈ 76 gpm)
  • Hydraulic cutter-head flow 35-50 L/min (≈ 9-13 gpm)
  • Hydraulic double cutter/auger head flow 70-100 L/min (≈ 18-26 gpm) (hitech-piling.it)
  • Typical pump head (for BELL 200) ≈ 65 m

Our inventory of pumps and dredge equipment changes often. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email us to discuss what you’re looking for.