Built in 1998 in France is a non-propelled cutter suction dredger. The dredge pump is a Caterpillar 3508 with 630kw @1800rpm. It has a max drilling depth of 12m and a maximum flow rate for water of 2880m3/hr. The cutter diameter is 1350mm. The deck crane has a capacity of 1.35T and a length of 10.5m. It has 2 hydraulically operated spuds each with a length of 19m and a diameter of 508mm.
The main engine was refitted in 2017 with 277 hours. Auxiliary engine: 5950 hours and generator: 9587 hours.
- Navigation permit: 5th category / sheltered waters. Valid until 05/2018.
- Load line certificate: BV 485 mm from deck. Valid until 05/2018.
- Class: Bureau VeritasI 3/3 (-) . Dredge / HULL / No propulsion. Sheltered waters. Valid until 05/2018
Inspection could be arranged in France. National load line certificate expired in may 2018. Last job was in 2017/early 2018. The dredge is being sold as is.
Location: Mediterranean
The caissons contain asbestos and lead. The dismounting and the transport of the dredger is not included in the price. All details on this page is given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
| General | ||||
| Built: | 1998 / Hydroland Sea, France | |||
| Class: | BV, expired in May 2018 | |||
|
Principal Dimensions and Characteristics |
||||
| Length Overall: | 32 m | 105-ft | ||
| Length (exc ladder): | 22.5 m | 73.80-ft | ||
| Beam: | 7.8 m | 25.6-ft | ||
| Depth: | 2.0 m | 6.56-ft | ||
| Draft: | Draft 1.23 m | 1.53 (full bunker) | ||
| Maximum Draft: | 1.52 m | 5-ft | ||
| Air Draft: | 7 m | 23-ft | ||
| Gross tonnage: | 78.15 tons | |||
| Weight: | 154 tons | |||
|
Engine |
||||
| Installed Power: | 861 KW | 1155 hp | ||
| Fuel Capacity: | 40,000 ltrs | 10,567 gal | ||
|
Dredging |
||||
| Dredge Pump: | Caterpillar 3508 | |||
| Dredge Pump Rate @1800 rpm: | 630 kw | 845 hp | ||
| Max. Dredging Depth: | 12.0 m | 39.4-ft | ||
| Discharge Diameter: | 406 mm | 16-inch | ||
| Max Flow Rate for Water: | 2880 m3/hr | 3767 yd3/hr | ||
| Power at the Cutter: | 100 kw | 134 hp | ||
| Cutter Diameter: | 1350 mm | 53.15-inch | ||
|
Machinery (Auxiliary engine) |
||||
| Motor: | CAT 3406TA | |||
| Power @ 1800 rpm: | 235 kw | 315 hp | ||
| Alternator: | 24V | |||
| Diesel generator: | 25 KVA 230/380 V | |||
| Fuel bunker: | 2 x 20000 L (lateral caissons) | |||
|
Spuds (2) |
||||
| Length: | 19m | 62.33-ft | ||
| Diameter: | 508 mm | 19.8-inch | ||
| Operated: | Hydraulically | |||
|
Winches |
||||
| Swinging winches: | 2 x 80 kN, 200 m wires diam 20 mm | |||
| Speed: | 0-36 m/min | |||
|
Deck Crane (HIAB 200) |
||||
| Capacity: | 1.35 tons – 10.50 m | 2.5 tons – 6.40 m | ||
|
Other info: |
||||
| Dismountable front gangway: Yes – cutter access Maritime equipment: Lights / Safety / Signals Dismountable: Yes Road transportable: YesDiameter 16′ Max discharge line 2880 m3 / clear water Pump: Submerged pump PMN40 MHT 72 m |
||||