8-inch Horizontal Cutter Dredge – VMI Model 815

  • 239,000 USD
  • 170430-DH

This listing is for an 8-inch Horizontal Cutter Dredge that was built in 2014. It has approximately 1,192 run time hours and was only used for one job.

Location: Texas, USA

Principal Dimensions and Characteristics
  Year Built: 2014
  Serial Number: 824
  Length: 11.73 m 38.6 feet
  Height (without A/C): 2.69 m 8.10 feet
  Beam: 3.02 m 9.11 feet
  Draft: 0.64 2.1 feet
  Weight (approx): 26,500 pounds
Engine
  Make/Model Cummins / QSL 9
  Power @ 2100 RPM: 242 kW 325 hp
Propulsion
  Type: Treble Sheave Hydraulic Winch
  Traverse Speed: 0 – 15.2 m per minute 0 – 50 feet per minute
  Cutting Speed: 0 – 4.57 m per minute 0 – 15 feet per minute
Electrical System
  Alternator:
    Output: 100 Amp
  Battery:
    Voltage: 12 Volts
Centrifugal Pump
  Material: Hi-Chrome Cast Iron
  Impeller Diameter: 625 mm 25 inches
  Discharge Diameter: 203.2 mm 8 inches
  Suction Diameter: 203.2 mm 8 inches
  Capacity @ 1030 RPM: 11,355 liters per minute @ 140 feet, head
Tank Capacities and Pontoons
  Fuel Oil Tanks Capacity:: 1,230 liters 325 gallons
  Side Pontoons (2):
  Dimensions: 863.6 mm (34 inches) x 1,016 mm (40 inches) x 10.52 m (34.5 feet)
Hydraulic System
  Hydraulic Pumps (4):
    3 x Variable Displacement, Axial Piston
    1 x Fixed Displacement
  Hydraulic Motors: Fixed Displacement
  Capacity @ 2200 RPM: 681.3 liters per minute 180 gallons per minute
  Reservoirs: 378.5 liters 100 gallons
Dredging Installation
  Cutter:
    Type: Horizontal with full width / flow through suction
    Length: 3.02 m 10 feet
    Width: 53.34 m 1.75 feet
    Speed: 0-80 RPM
    Torque: 30,348 lbs
    Operating Depth: 4.57 m 15 feet
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice