8-inch Horizontal Cutter Suction Dredge Mud Cat 115D

  • 260,000 USD
  • 220608-DH

Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutterhead with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid passage of 4.3 inches. Engine is a 124 hp John Deere 4045TFM85 4.5L Tier 3/Stage III A Platform. The dredge has a fuel capacity of 90 gallons. Overall length is 24.68-ft, width is 8.5-ft and draft of 19.5in. Overall weight is 8,250 lbs. Dredge was purchased new by the current owner in 2019.

Location: State of New Jersey, USA

Principal Dimensions and Characteristics
  Length Overall: 24.68-ft 7.52 m
  Width Overall: 8.5-ft 2.59 m
  Height Overall: 8.925-ft 2.72 m
  Max. Dredging Depth: 15-ft 4.57 m
  Draft: 19.5-in 0.5 m
  Weight Overall: 8,250 lbs 3401 kg
  Type: SolidsMaster Cutterhead
  Width: 7-ft 2.13 m
  Speed: 60 rpm  
  Diameter: 17-in 43.18
  Cutter Shanks: 3/8-in 9.5 mm
  Cutter Torque: 12,000 in-lbs 5,443 kg-m
  Avg. Cutting Speed: 8-10 fpm 2.11-3.66 m/min
Sludge Pump
  Discharge Diameter: 8 in 203 mm
  Closed Impeller Solid Passage: 3.6-in 91 mm
  Open Impeller Solid Passage: 4.3-in 109 mm
  Make/Model: John Deere 4045TFM85 4.5L Tier 3/Stage III A Platform
  Power: 125 hp 93 kW
  Fuel Capacity: 90 gal 340.7 ltr
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice