This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are available.
Location: State of Mississippi, USA
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 38-feet 6-in | 11.73 m | ||
| Width: | 9-feet 11-in | 3.02 m | ||
| Height Over All: | 8-feet 10-in | 2.69 m | ||
| Dry Weight: | 26,500 lbs | 12,020 kg | ||
| Draft: | 25-in | 635-mm | ||
| Year Built / Where Built: | 2021 / USA | |||
| Dredging Capacities | ||||
| Dredging Depth: | 15-feet | 4.57 m | ||
| Cutter Speed: | Variable 0-80 RPM (Forward & Reverse) | |||
| Torque: | 3,483 N-m | 30,828 in-lbs | ||
| Dredge Pump | ||||
| Type: | Hi-Chrome cast iron, centrifugal, full recessed impeller | |||
| Suction: | 203 mm | 8-in | ||
| Discharge: | 8-inches | 203 cm | ||
| Capacity: | 3000 gpm | 11,356 L/min | ||
| Impeller | 63.5-cm | 25-in | ||
| Engine | ||||
| Make / Model: | Cummins Diesel | |||
| Horsepower: | 345 hp | 257kW | ||
| Fuel Capacity: | 325 gal. | 1,230 liters | ||
| Propulsion Type: | Treble sheave hydraulic winch | |||
| Traverse Speed: | 0-4.57 m/min | 0-15 ft/min | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||