Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition.
The attachment is currently set up for a Komatsu 400 excavator. Requires a separate Hydraulic Power Unit to operate. EDDY Pump circuit requirements from excavator auxiliary power OR from Hydraulic Power Unit 120-160 GPM at 5000 PSI (500cc motor). Cutterhead circuit requirements from excavator auxiliary power OR from Hydraulic Power Unit 12-20 GPM at 5000 PSI.
Location: State of California, USA
| Principal Dimensions and Characteristics | ||||
| Length: | 154-in | 3.9 m | ||
| Height: | 48-in | 1.2 m | ||
| Width: | 46-in | 1.17 m | ||
| Rotating Head Diameter: | 35-in | 90 m | ||
| Weight: | 7,500 lbs | 3400 kg | ||
| Operating Levels | ||||
| Min Flow | 1200 gal/min | 4542 lts/min | ||
| Max Flow: | 5000 gal/min | 18927 lts/min | ||
| Head Range: | Up to 200-ft | Up to 61 m | ||
| Discharge: | 10-in | 254 m | ||
| Suction: | 12-in | 304 m | ||
| Solid Handling: | up to 9-in | up to 229 m | ||
| Max Speed: | 1800 RPM | 1800 RPM | ||
| Percent Solids: | Up to 40-70% Solids | Up to 40-70% Solids | ||
| Capacity: | 300-350 yd3/hr | 229-268 m3/hr | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||