-
1998 VMI 815 8″ Auger Dredge
- 95,000 USD
- 240201-DH
Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…
-
10-inch SDR 17 HDPE Pipe
- 230408-PP
Quantity Available: Between 10,000-12,000-ft of 10-inch SDR 17 Pipe in 40-foot sections. Pipe can be banded for transportation. Location: State of New Jersey, USA USD 8.25 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot…
-
SOLD – 20 inch Ellicott Dredge 1870
- 3,077,000 USD
- 221108-DB
Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…
-
Pipe Floaters for 16-inch IPS pipe size
- 230803-PF
45 pairs of un-used, Neptune PF16-400-R 16” Floats. Location: State of California, USA
-
24-inch SDR 17 HDPE Pipe
- 220405-PP
Quantity Available 2,000 feet 35 pieces of 50-ft lengths and 10 pieces of 25-ft lengths. Pipe used on a potable water pipeline construction project. Condition of the pipe is good with minor scrapes on the outside from handling. $15.00 per ft Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black)…
-
Excavator Pump Attachment 6-inch Eddy Pumps
- 96,200 USD
- 220219-CP
Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Principal Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in…
-
10-inch Slurry Hose
- 20,250 USD
- 220222-PH
Quantity Available – 132-feet. Hose is in very good condition. Used for only one specific job. Very low hours. Location: State of California, USA Principal Dimensions and Characteristics Hose Inner Diameter: 254 mm 10-in Outer Diameter: 288 mm 11.3-in Thickness of Inner Layer: 8 mm 5/16-in Working Pressure: 150 PSI Standard ANSI 150 PSI Flange…
-
12-inch SDR 11 HDPE Pipe (Polypipe)
- 220301-PP
Quantity Available: -65,000-feet cut in 50-ft lengths. Reported to have no internal wear. Pipe used to transport water. Location: State of Pennsylvania, US Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
10-inch Disch. Horizontal Cutter Dredger IMS Model 4010
- 112,000 USD
- 220104-DH
Built in 2001. Designed and built by IMS, this 177 horsepower unit was made as a self-contained and portable hydraulic power source. The primary purpose of the power unit is to furnish high-pressure fluid to power the hydraulically driven IMS pumping system. The Murphy hour meter reads 641 hours. The dredge is in complete running…
-
900- hp Twin Screw Truckable Tug for Charter
- 220216-VW
Only used on one project the twin screw tug is powered by 2 Two John Deere 6068AFM85 diesel engines with 2 x 300 hp. Propellers are 34”x18” x 4 blade bronze propellers and has two main steering rudders and four flanking rudders. The tug has 2 bow hand deck winches and push knees 7’-0” above…
-
4-inch Horizontal Cutter Dredge, Model VMI MDE-415HN
- 78,000 USD
- 210920-DH
Built in 1992 with dual hydraulic pump drive – direct from engine. Dredging debt is 15-ft. Cutter diameter is 16-in with a width of 8-ft 6-in. Pump suction and discharge diameters are 4-in. Pump capacity is variable to 1000 GPM @ 130’ Head (Water @ 68 degrees F) @1750 RPM. The dredge has a length…
-
8-inch SDR 7.3 HDPE Poly Pipe
- 211011-PP
Available: 39,000-feet in approximate 50-foot lengths. Location: State of Texas, USA Standard Dimension Ratio (SDR) 7.3 Material High Density Polyurethane (Black) Pipe OD (Nominal) 8.625-inches 219 mm Pipe ID (Nominal) 6.119-inches 155.4 mm Wall Thickness (Nominal) 1.182-inches 30 mm Weight Per Foot 11.99-pounds 5.4 kg…
-
Twin Disk MG 518 Marine Gear 2.47/1 reduction
- 28,000 USD
- 211006-CH
Twin Disc MG 518-1; 2.47 to 1 reduction; sn 3 x 3918; rated 750 hp. Has been inspected and is in very good condition. Location: State of Nebraska, USA
-
900 hp Twin Screw Pushboat (Towboat)
- 295,000 USD
- 210707-VT
Powered by 2 x 12V71 Detroit engines with total of 900 hp. Engines have approx. 5000 work hours. Towboat has a length of 56-ft, width of 22-ft and depth of 8-ft. Fuel capacity is 9000 gallons. Boat is fully functional – engines ran smoother and quietly, tug neat and clean. Complete support equipment is included.…
-
54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
- 425,000 USD
- 210803-BW
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
1,700 hp Twin Screw Offshore Supply Vessel (OSV)
- 975,000 USD
- 210801-VO
Twin Diesel Caterpillar c32 engines with 1,700 hp with a deck area of 340 m2 (34.6 x 9.81 m), GT of 624 and NT of 187. Cruising speed is 9 knots and towing speed of 4-6 knots with a bollard pull of 17 tons.. The vessel has a Link Belt Modela HSP-8040 Hydraulic Telescope Crane…
-
6-inch SDR 11 HDPE Pipe
- 210901-PP
Quantity Available: 4,400-feet of 6-inch SDR 11 Pipe. 96 sticks of 40-ft and the rest in various lengths. Was used for temp fire water. It is in good condition. Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 6.625-inches 168.275…
-
16-inch SDR 17 HDPE
- 15 USD
- 210904-PP
Quantity Available – 9,000-ft in 500 to 800 foot strings. Cost of cutting and loading $3,500, or buyer can cut and load. $15.00 per foot Location: State of Louisiana, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 406.4 mm 16 inches Pipe ID (Nominal) 356 mm 14.005 inches Wall Thickness…