-
10-inch SDR 17 HDPE Pipe
Quantity Available: Between 10,000-12,000-ft of 10-inch SDR 17 Pipe in 40-foot sections. Pipe can be banded for transportation. Location: State of New Jersey, USA USD 8.25 per foot Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot 8.76-pounds…
-
2-inch SDR 7 HDPE Pipe
Quantity Available: 50,000-feet most in 40-ft sticks. Unused stock. Location: State of Colorado, USA Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 2.37-inches 60.2-mm Pipe ID (Nominal) 1.66-inches 42.2-mm Wall Thickness (Nominal) 0.339-inches 8.6-mm Weight Per Foot 0.95-pounds 0.4 kg Standard Dimension Ratio (SDR) 7 Our pipe inventory changes weekly. If you…
-
12-inch SDR 11 HDPE Pipe (Polypipe)
Quantity Available: -65,000-feet cut in 50-ft lengths. Reported to have no internal wear. Pipe used to transport water. Location: State of Pennsylvania, US Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
12-inch SDR 17 HDPE (Polypipe) with some Flanges
Quantity Available: – 7,000 feet. Pipe is in very good condition. It was purchased for a specific job, it was never used again. Very low hours and excellent condition. The pipe was in 300’ lengths with flanges on each end. It was cut to 100’ lengths for storage and can be cut to 50’ for…
-
8-inch SDR 7.3 HDPE Poly Pipe
Available: 39,000-feet in approximate 50-foot lengths. Location: State of Texas, USA Standard Dimension Ratio (SDR) 7.3 Material High Density Polyurethane (Black) Pipe OD (Nominal) 8.625-inches 219 mm Pipe ID (Nominal) 6.119-inches 155.4 mm Wall Thickness (Nominal) 1.182-inches 30 mm Weight Per Foot 11.99-pounds 5.4 kg…
-
16-inch SDR 17 HDPE
Quantity Available – 6,000-ft in 500 to 1000 foot strings. $14.30 per foot Location: State of Louisiana, USA Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 406.4 mm 16 inches Pipe ID (Nominal) 356 mm 14.005 inches Wall Thickness (Nominal) 24 mm 0.941 inches Weight Per Foot 19.42 lbs per foot Standard…
-
SOLD: 16-inch SDR 17 HDPE (Polypipe) New Surplus
Quantity Available – 1,000 ft in 40-foot lengths (25 pieces total). New Surplus. Location: State of Florida, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 406.4 mm 16 inches Pipe ID (Nominal) 356 mm 14.005 inches Wall Thickness (Nominal) 24 mm…
-
12-inch SDR 11 HDPE Pipe
Quantity Available: – 6,000 feet. Pipe was only used on one job pumping slit and shows very little wear, if any. Price includes delivery to Port of Seattle, Washington USA Location: State of Hawaii, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261…
-
12-inch SDR 17 HDPE Pipe
Quantity Available: – 5,500 feet. Pipe was only used on one job pumping slit and shows very little wear, if any. Price includes delivery to Port of Seattle, Washington USA Also available 12-inch SDR 11 HDPE – see 210407-PP. Both can be purchased “en block” for a significant freight advantage. Located in the State of Hawaii,…
-
SOLD: 17-inch, HDPE Polypipe 1.1-inch Wall SDR 15
Quantity available: 141 feet in various lengths. Pipe lengths are 2-50 foot length, 1-22 foot length and 1-19 foot length NOT AVAILABLE 2 pcs 50-foot long 1 pcs 22-foot long 1 pcs 19-foot long TOTAL 141-FEET Location: State of Florida, USA
-
12-inch SDR 17 Pipe in 20-foot Sections
Quantity Available – 640-feet of 12-inch SDR 17 Pipe in 20-ft sections. Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane Pipe ID (Nominal) 11.160-inches 284 mm Pipe OD (Nominal) 12.74-inches 323.6 mm Wall Thickness (Nominal) 0.75-inches 19.05 mm Weight Per Foot 12.42-lbs 5.63 kg Our pipe inventory changes weekly. If…
-
SOLD: 12-inch SDR 17 HDPE Pipe
2 miles of 12-inch SDR 17 HDPE Pipe in 50-ft sections. Used for fresh water transfer. Pipe is reported to be in excellent reusable condition. Location: state of Tennessee, USA Principal Dimensions and Characteristics Material High Density Polyurethane Pipe OD (Nominal) 12-inches 304.8 mm Pipe ID (Nominal) 12.74-inches 323.6 mm Wall Thickness (Nominal) 0.75-inches 19.05…
-
SOLD: 8-inch SDR 17 & SDR 26 HDPE Pipe Mixed
Approximately 2,400 m of 8-inch SDR 17 & SDR 26 HDPE Pipe mixed with couplings and flanges. 200 pieces of 12 m lengths. Pipes was only used 100 hours total. About 50 pieces were never used (new). Produced in 2019. Can be purchased en-bloc with 200824-PF and 200822-CP Location: Netherlands Standard Dimension Ratio (SDR) 17…
-
10-inch SDR 7.3 HDPE (Polyetheline) pipe
15,840-feet of 10-inch SDR 7.3 used to transfer produced water. Pipe is in 50′ sections. SOLD Location: state of Tennessee, USA Dimensions and Characteristics Pipe OD (Nominal): 10.75-inches 273 mm Pipe ID (Nominal): 7.494-inches 190.35 mm Wall Thickness (Nominal): 1.536-inches 39.01 mm Weight Per Foot: 19.40-pounds 8.80 kg Our pipe inventory changes weekly. If you…
-
SOLD: 42-inch, HDPE Polypipe 1.5-inch Wall
Quantity available: 109 feet in various lengths. Pipe lengths are 1-37 foot length, 1-34 foot length, 2-14 foot length, 1-10 foot length Location: State of Florida, USA USD 53.00 per foot
-
SOLD: 12-inch SDR 17 HDPE Pipe
Quantity available: 2,700-feet of 12-inch SDR 17 in 50-foot lengths. Approximately 40 flanges included. SOLD Location: state of Maryland, USA Principal Dimensions and Characteristics Material: High Density Polyurethane (Black) Pipe OD (Nominal): 12.75-inches 323.85 mm Pipe ID (Nominal): 11.16-inches 283.46 mm Wall Thickness (Nominal): 0.750-inches 19.05 mm Weight Per Foot: 12.34-pounds 5.6 kg Standard…
-
10-inch SDR 17 HDPE Pipe
Quantity Available: 800-feet of 10-inch SDR 17 Pipe. Approximate 50-foot sections. Flanges sold separately. See flange listing. Location: State of Florida, USA Principal Dimensions and Characteristics Material: High Density Polyurethane (Black) Pipe OD (Nominal): 10.75-inches 273.05-mm Pipe ID (Nominal): 9.410-inches 239-mm Wall Thickness (Nominal): 0.632-inches 16.05-mm Weight Per Foot: 8.76-pounds 4 kg Standard Dimension Ratio…
-
10-inch SDR 11 HDPE Pipe
Quantity Available: 4,600-feet of 10-inch SDR 11 Pipe in 50-foot lengths. Location: State of Wyoming, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273 mm Pipe ID (Nominal) 8.68-inches 220 mm Wall Thickness (Nominal) 0.997 25.3 mm Weight Per Foot 13.14-pounds 5.96 kg Standard Dimension Ratio (SDR) 11 All…