-
1,800 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1983 in The Netherlands, this 1,800 m3 trailing suction hopper dredger has a dredging depth of 30 m and a suction pipe diameter of 60 mm. Powered by Wartsilla, SW260 engine with controlled pitch propeller and electric bow thruster. The dredger length is 89.97 m , width is 12.45 m and the loaded…
-
4700 m3 Trailing Suction Hopper Dredger w/Rainbowing
Built in 1986 by IHC Holland in The Netherlands, the Trailing Suction Hopper Dredger has a class notation of Russian Maritime Register of Shipping. The dredger has 2 x 810 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 700 mm (28-inch). The hopper capacity is 4700 m3 (6,147 yd3) and can…
-
1,000 m3 Trailing Suction Hopper Dredger w/ Side Casting
This 1,000 m3 Trailing Suction Hopper Dredger w/ Side casting was built in 1978 in Japan. It’s Classification Society / Notation is KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger. Located in the Black Sea Dimensions and Characteristics Year Built: 1978 Classification Society: KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger Length…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
-
SOLD: 522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out
This 522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out was specially built in the Netherlands in 1965, was rebuilt in 1989 and has been modified several times since. Location: The Netherlands Principal Dimensions and Characteristics Year Built/Rebuilt: 1965 / 1989 Length: 72.65 m 238-feet Width: 7.12 m 23-feet Height:…
