18-inch Submersible Pump Sand Dredger

  • 1,026,000 USD
  • 211210-DU
  • Location: SE Asia / Oceania

Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is 272 and NT is 81. Dredger was built in 2012 in Singapore.

Location: Southeast Asia

General Information
Built: 2012 / Singapore
Principal Dimensions and Characteristics
Length Over All: 39.8 m 130.6-ft
Breadth: 12.0 m 39.4-ft
Depth: 2.40 m 7.9-ft
Draft: 1.0 m 3.3-ft
GT / NT: 272 / 81
Engines & Generators
Main Generator: GM 1,800 hp/1,250 KW/3,300V/60Hz
Aux Generator: Denyo DCA 220SPK x 2 units
Aux Generator: Denyo DCA 65 x 1 unit
Equipment
Sand Pump
Make: Toyo-Denki DP600-12W/450KW/3,300V/60hz
Pump Diameter: 450 mm 18-inch
Pump Capacity (@20 m head): 3,500 m3/hr 4,580 yd3//hr
Jetting Pump/Engine
Make/Model: Ebara 300/200
Power: 110KW/440V/60Hz
Pump Capacity(@ 50m head): 600 m3/hr 785 yd3/hr
Main Winch
Model: Kitagawa 15 Ton, Double Drum
Power: 55KW, 440V/60hz
Swing/Anchor Winch 37KW/440V/60Hz, 10 Ton x 5 units
X-Mass Tree: Available (Three Anchors)
“A” Frame: SWL 30 Ton, 14.0m height from deck
Dredge
Dredging Depth(min): 1.5 m 4.9-ft
Dredging Depth(max): 15.0 m 49.2-ft
Dredging Depth(extended up to): 30.0 m 98.4-ft
Operating Crew
Crew: 6
Accommodations: 12
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice