Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a self-propelled, diesel engine drive, four wheel drive and steer, rubber tired, rough terrain hydraulic crane. The Push Boat has a length of 25-ft and width of 13-ft 7-in. It is powered by 2 John Deer model: 6068TFM75A with engine hours of 565.
Location: State of New Jersey, USA
| Pusher Boat | ||||
| Length: | 7.62 m | 25-ft | ||
| Width: | 4.08 m | 13-ft 7-in | ||
| Depth: | 1.83 m | 6-ft | ||
| Engine | ||||
| Make/Model: | John Deer model: 6068TFM75A | |||
| Power: | 2 x 149 kw | 2 x 200 hp | ||
| Engine Hours: | 565 | |||
| Barge | ||||
| Pontoons (4): | 3-12×3 m, 1-4.3x 9.1 m | 3-40×10-ft, 1-14×30-ft | ||
| Length: | 16.5 m | 54-ft | ||
| Width: | 9.144 m | 30-ft | ||
| Depth: | 1.52 m | 5-ft | ||
| Spuds (4) Length: | 13.716 m | 45-ft | ||
| Crane | ||||
| Make/Model | Pettibone / 36 | |||
| Engine | ||||
| Make/Model | Detroit Diesel / 6V-53N | |||
| Power @2600 RPM: | 131 kw | 176 hp | ||
| Fuel Capacity: | 227 litres | 60 gals | ||
| Capacity: | 16,329 kg | 36,000 lbs | ||
| Number of Hoists: | Main Only | |||
| Wheel Base | 3.05 m | 10-ft | ||
| Overall Height: | 3.66 m | 12-ft | ||
| Overall Width: | 2.44 m | 8-ft | ||
| Boom Pivot Pin to Centerline of Turntable: | 13.72 m | 45-ft | ||
| Basic Vechile Weight: | 24,721 kg | 54,500 lbs | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||