Built in 2012 with total hours on dredge of 7,000. Powered by a 375 hp John Deere Motor with 1,000 runtime hours. Dredge Pump is an 8-inch Metso pump (new) with suction diameter of 8-in and discharge diameter of 8-in. Cutter diameter id 31.5-in.. Pump capacity of up to 2,500 gallons “GPM”
Location: State of Florida, USA
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 17.9 m | 58-ft 8-in | ||
| Width: | 4.9 m | 16-ft 3-in | ||
| Depth Hull: | 1.1 m | 3-ft 6-in | ||
| Hull Draft: | 0.7 m | 2-ft 4-in | ||
| Number of Pontoons: | 3 | |||
| Dry Weight: | 24,040 kg | 53,000 lbs | ||
| Fuel Capacity: | 946 liters | 250 gal | ||
| Dredging Capacities | ||||
| Dredging Depth max.: | 4.4 m | 15-ft | ||
| Dredging Depth min: | 0.7 m | 2-ft 4-in | ||
| Dredge Pump | ||||
| Make: | Metso | |||
| Suction Diameter: | 200 mm | 8-in | ||
| Discharge Diameter: | 200 mm | 8-in | ||
| Capacity: | Up to 2,500 gallons “GPM” | |||
| Cutter Drive | ||||
| Power at Cutter Shaft: | 30 kW | 40 hp | ||
| Cutter Speed: | 0-39 RPM | |||
| Cutter Diameter: | 800 mm | 31.5-in | ||
| Cutting Force: | 1,815 kg | 4,000 lbs | ||
| Engine | ||||
| Make / Model: | John Deere 9.0L Marine Engine | |||
| Power: | 280 kW | 375 hp | ||
| Rating: | Tier 3 Marine | |||
| Cooling: | Radiator | |||
| Spuds | ||||
| Front: | 2 | |||
| Rear: | 1 | |||
| Kicker Spud Advancement: | 711 mm | 28-in | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||