900- hp Twin Screw Truckable Tug for Charter

  • 220216-VW

Only used on one project the twin screw tug is powered by 2 Two John Deere 6068AFM85 diesel engines with 2 x 300 hp. Propellers are 34”x18” x 4 blade bronze propellers and has two main steering rudders and four flanking rudders. The tug has 2 bow hand deck winches and push knees 7’-0” above deck, 9’ over all height. Pads are 2² thick rubber bonded to ½² x 10² steel backing plat. The tug is truckable. Length is 25-ft 3-in, breadth is 14-ft and depth is 5-ft.

Location: state of Oregon, USA

         
General
  Hull: steel
Principal Dimensions and Characteristics
  Length: 7.7 m 25-ft 3-in
  Breadth: 4.27 m 14-ft
  Depth: 1.52 m 5-ft
  Displacement: 19,504 kg 43,000 lbs
  Push Knees: 7’-0” above deck, 9’ over all height.  Pads are 2² thick rubber bonded to ½² x 10² steel backing plate.
Machinery and Propulsion
  Engines
    Make/Model: Two John Deere 6068AFM85 diesel engines
    Total Power @2500 RPM: 2 x 224 kw 2 x 300 HP (M3 rating),
  Propulsion
    Main Propulsion System: Twin Screw
    Propellers (2): 34”x18” x 4 blade bronze propellers
    Rudders: Two main steering rudders and four flanking rudders
Capacity
  Fuel Tank: 1893 liters 500 gal
Additional Information
  Winches (2): 2 bow hand deck winches
  Hydraulic Steering: Two hydraulic pumps
  Bilge Pump: Two 12 volt 1,000 GPH pump.
  Fire Det/Gen Alarm: One fire detection and general alarm
  BITTS: One double towing bitt, one single head bitt, and four single quarter bitts
  Lifting Eyes: Four permanent eye straps welded to hull
  Anodes: Four 12-pound zinc anodes installed on bottom aft
  Navigation Lights: Mast on top of pilot house has two white tow lights forward and two amber tow lights aft. Green and red side lights installed on the side of the pilot house.
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice