-
57.8 m Low Air Draft Ro-Ro barge
Originally built for shipping airplane wings for Airbus in Wales. The low air draft and shallow draft makes it perfect for passing under low bridges and canals in cities. It has a low level cargo deck with 300 tons capacity, lift system to lower cargo pallet legs in to the hull for low air draft,…
-
2432 hp twin Screw Towing Tug
Built in 1982, in the Netherlands. Hull is steel, flag Norway and classed DNV +1A TUG. The tug is Powered by 2 x Caterpillar D 399 PCTA with 2432 hp. Bow thruster is retractable 360 degrees Holland Roer type HRP-330-50. Has a bollard pull of 32 tonnes / 4 tons in all directions. It has…
-
46 m x 16 m x 3 x Flat Deck Pontoon (Deck Barge) w/ Fuel Cargo Tank
This barge was originally built in 1994/95. It is registered Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 and classed Germanischer Lloyd 100 A 5 I “Ponton” – discontinued. It has a 20.000 liter diesel tank. Location: Germany Principal Dimensions and Characteristics Built: 1994/95 Registry: Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 Class: Germanischer…
-
28.90 x 13.65 x 2.63 m Excavator Pontoon (Deck Barge)
The deck barge was built in 1976 and rebuilt in 2019. Comes with spud legs and lifting winches. Spuds (2) have a height of 14 m. Draft 0.65 m. Hydraulic vertical support legs built for the pontoon provides positioning depth of 12 meters. The total useful area of the pontoon is 394.5 m2. Location: Baltic…
-
2,500-tonne Deck Barge w/ 4-point Mooring and 2-spuds for Charter
Available for charter. The deck barge has a declk load of 10T/m2 and available area of 620 m2. It has 2 spuds with a length of 18 m and Double Drum Slipway Winch (4). The barge has an overall length of 62.59 m and breadth of 23.54 m. Light draught is 0.7 m and loaded…
-
357 m3 Non-Self-Propelled Bottom Dumping Hopper Barge
For sale or charter. Built in 1980 in Portugal. The barge has a length of 44.89 m and a breadth of 8.16 m. DWT is 826 tonnes. Location: Northern Europe General Built: 1980 / Portugal Hull Material: steel Principal Dimensions and Characteristics Length Over All: 44.89 m…
-
49.6 m x 19.5 m x 4.3 m Flat Top Barge, 1,800-tonne Dead Weight
Available for charter. Built in 1977 in Italy the barge is non-self-propelled. Class is RINA International 20 nm Offshore. 49.6 m x 19.5 m x 4.3 m Flat Top Barge has a GT to 1080 tonnes. Free space for loading: complete – bollards under deck. Authorized RoRo embarkment: by ramp driveable capacity T90 – per…
-
406 mm (16-inch) Cutter Suction Dredger (CSD)
Built in 1998 in France is a non-propelled cutter suction dredger. The dredge pump is a Caterpillar 3508 with 630kw @1800rpm. It has a max drilling depth of 12m and a maximum flow rate for water of 2880m3/hr. The cutter diameter is 1350mm. The deck crane has a capacity of 1.35T and a length of…
-
550 m3 Self-Propelled Bottom Dumping Hopper Barge
Built in 1990 in Russia, the barge has a steel hull. It has a Class Scoieth and Notation of Phoenix 3nm offshore. Hooper capacity is 550m3 (719 yd3). It is powered by 2 overhauled VOLVO PENTA TD 162 with propulsion power of 2 x 220hp. Max speed is 9 knots and cruising speed is 6.5…
-
Bucket Wheel Dredger and matching Hopper Barge Set
Available for charter or sale. The dredger has a dredging depth of 18m and can be extended to 24m. Bucket capacity is 775lt. The output rate is 750 m3/h. It is powered by 2 engines both full overhauled in 2021. The dredger has a length of 80.17m, a breadth of 14.42m and a depth of…
-
2840 DWT Deck Barge 60m x 20m x 4m (Flat Top Pontoon)
There are two sister ships for sale or charter. Deck plating is 16mm, extra heavy deck. The clear deck area is 1175m2 and a deck load of 20 ton/m2. The deck is accessible via bow & stern section for ramps (8 x 1.5 m each). The barge has 2 spud wells. Location: UK Coast BARGE Built Year / Place: 2014…
-
128 m3 New Non-Propelled Split Hopper Barge
NEW BARGE – Just used for testing. Built in 2020. The 128 m3 hopper capacity has a load capacity of 150 tons. Barge opening system is with hydraulic actutors – Iveco diesel hydraulic unit new with 150hp. Length is 24.146 m and width is 7.520 m. Location: Northern Europe General…
-
50-tonne Modular Jack Up Barge
15 m x 12 m x 1.5 m dismountable jack up barge. Movable using 5 trucks (3 x 40-ft and 2 x 60-ft). Spuds are 20 m in length and wall thickness of 20 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 50 tonnes. Location: Ireland Principal…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
6 m3 Grab Bucket Dredger w/ Mitsubishi S6N-MPTA Crane
6 m3 Grab Bucket Dredger was built in 1976. The dredge has a length of 33.62 m, a breadth of 15.0 m and depth of 2.50m. The crane is a SKK 570 GDX-F with a capacity of 100 tons. Boom length is 28.0 m. Dredging capacity is 570 m3/h. The main engine is a 145hp…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi 8DC-61C Crane
6 m3 Grab Bucket Dredger was built in 1988. The dredge has a length of 33.62 m, a breadth of 16.0 m and depth of 2.50 m. The crane is a P & H FD600 with a capacity of 85 tons. Boom length is 32.0 m. Dredging capacity is 480 m3/h. The main engine is…
-
800 hp Single Screw General Purpose Towing Tug
Single screw tug is powered by a NIIGATA 6MG 20 CX 800hp engine. The tug has a length of 23.90 m, a breadth of 7.0 m and depth of 3.0 m. The tug was built in 1985 in Japan. Location: West Mediterranean Sea General Built Year / Place: 1985…
-
80-tonne Modular Jack Up Barge
18 m x 12 m dismountable jack up barge. Movable using 10 trucks (8 x 40-ft and 2 x 60-ft). Spuds are 18 m in length and wall thickness of 25 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 80 tonnes. Location: Ireland Principal Dimensions and Characteristics…
