-
20,000-tonne Floating Dry Dock
Cassion Dock for transportation and launching. The Dry Dock has a lift capacity of 20,000 Ton and a Max draft of 5.7 m. It has a length of 76 m, an inside breadth of 48 m and outside breadth of 60.0 m. Ballast pump capacity is 3,000m3/h x 12m x 180Kw. It has 2 deck…
-
13 m3 Grab Bucket Dredger
Built in Japan in 1982, the dredger has a SKK 16013 GDT -A crane with a dredging depth of 50m (164-ft). The bucket is a light : 13m3 (40 Ton) / Heavy : 8m3 (45 Ton). The Rock Breaking Hammer capacity is 40 Ton/50 Ton. Gross tonnage is 2,098. Location: South Korea General Year Built:…
-
10 m3 Grab Dredger
Built in 1982 in Japan. The dredger has a SKK-1008GDT-A crane with a dredging depth of 40 m. Bucket capacity Light is 10m3 (25 Ton) and Heavy 6m3 (30 Ton) and two 35 Tom Hammer. The dredger has 2 23m spuds. The length is 41.31m, breadth is 16.0m and has a depth of 3.0m. The…
-
15 m3 Grab Dredger
770 GT Grab Dredger built in 1979 in Japan. It has a length of 49.94 m, breadth of 19.0m and depth of 3.5m. The spud is 38m. The SKK-16016 GDT-B crane has a24m boom and can dredge to a depth of 50m. Hoist speed is 65m/min. The bucket is 15m3 x 45 Ton (Light) and…
-
8 m3 Grab Dredger
318 Ton Grab Dredger built in 1986 in Japan. The dredger’s Class is KST. It is 33.62m in length and 16.0 in breadth and depth of 3.0 m. It has a SKK-1800GDT-A with a max dredging depth of 40m. Bucket size is Light 8m3 and Heavy 6 m3. Hammer (2) is 28 Ton. Engine is…
-
8 m3 Grab Dredger
The 394 ton Grab Dredger was built in 1989 in Japan. The crane is a SKK-1508GDT-F with a dredging depth of 40m. Bucket size is light 8m3 (25 ton) and heavy 5m3 (30 ton). Lifting capacity is 40 ton, 400m3/hr. Engine power is 1310hp x 1800 rpm. The dredger has a length of 36.48m and…
-
16 m3 Grab Dredger
This 758 GT Grab Dredger was built in 1979 in South Korea. It is classed KST. It has a SKK-13016GDT-A crane with lifting capacity of 100 Ton(60°) at 24.4m ~ 48.0m, 136 Ton(80°) at 12.7m ~ 25.30m. The max dredging depth is 50m with a dredging capacity of 290m3/hr. Bucket capacity is 16(Light, 45ton) /…
-
0.5 m3 x 75 Bucket Ladder Dredger 800 m3/hr
Built in 1986 in Japan. This dredger has discharge system of Port/STBD Conveyor Systems (1.7mW x 15.6 mL) x 2 sets. Dredging depth is min -6.0 m – max -18.5 m and a width of 60.0 m. It has 2 spuds that are 1,100 mm diameter and 38.0 mL. GT is 1,939 and NT is…
-
18-inch/450 mm Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
The MC 115D – was designed around the premise of making a durable, productive, transportable, stable, safe, and affordable dredge for entry-level buyers or operations on a budget. The controls can be learned quickly, and maintenance is simple. The system boasts a powerful 125 HP (93 kW) diesel engine, 2,000 GPM (454m3/hr.) dredge pump, and…
-
12 m3 Excavator Dredge Hitachi EX1900-6
Dredge was built in 2018 in Korea and is registered in Panama. The excavator is a 2014 Hitachi. The dredge has 3 spuds of which one is a tilting spud each with a lengths of 30 m, diameter of 1,300 mm and speed of 8~11 m / min. GT is 516 tonnes. Maximum dredging depth…
-
1,300 m3 Split Hopper Barge, Reinforced for Rock
Built in 2010, the barge hopper is 35mm thick and can be used for rock & stone. The main engine is 2 NINGDONG with 2 x 473 hp. Maximum speed is 11 knots. The barge length is 64.85 m, beam is 13.2 m and depth is 4.6 m. Location: Malaysia …
-
91 m, 7,400 DWT Deck Barge
Built in 2012 in China, it was used by the shipyard that built her for light shipyard work. The barge remains in very good condition and ready to be put in service.. Ramp door & hydraulic winch were installed in 2019. Barge is 91.5 m in length, 24.4 m in breadth and has a depth…
-
92m x 36m x 5.8m 12,000 DWT Ballastable Deck Barge
The deck barge was built in 2007. Port of Registry is Korea. Ballast tank capacity is 11,838 T with the ballast pump capacity of 2,000T/h. The deck load capacity is 10 T/m2. Can be purchased in package with sister barge – see #200806-BD Location: Korea General Built Year: 2007…
-
96.7m x 19.8 m x 5.75m Self Propelled Deck Barge w/Ramp
Powered by 2 CUMMINS K50-M with 1342 kW (1825 hp) each has a max speed of 12.3 knots and a service speed of 11.8 knots. The barge has fixed pitch propulsion. GT is 2676 and dead weight is 5060 Ton. The barge was built in 2017 in China and its Port of Registry is Korea.…
-
92m x 36m x 5.8m 12,000 DWT Ballastable Deck Barge
The deck barge was built in 2011. Port of Registry is Korea. Ballast tank capacity is 11,868 T with the ballast pump capacity of 2,000T/h. The deck load capacity is 10 T/m2. Can be purchased in package with sister barge – see #200805-BD Location: Korea General Built Year: 2011…
-
27,000 m3 Trailing Suction Hopper Dredger (TSHD)
This Vessel has the function of the Dredging capacity which is 11,500m3/Hr pump from 15m~60m, and the Discharge capacity which is Dumping Conical Valve system, Shore delivery system(4,000m3/Hr), and Rainbow system. The dredger is 206.75 m (677.5-feet) in length with a draft of 12.351 m (40.5-feet). This Vessel was converted from 54,000 Ton Class Grain…
-
Revolving Crane Barge with Towing Tug & Pusher Boat
The barge was built in 1997 in Japan. It has a hold capacity of 1020 m3. The crane is a SKK-16010GDT-AS with a lift capacity of 165 tonnes and includes a grab bucket of 12 m3 x 20 tonnes. The barge has 2 sets of spuds. It is reported to be in good operating condition.…
