-
Newly Listed – 12″ SDR 17 Pipe
12″ SDR 17 HDPE Pipe located in the United States. 15,000 ft. available at $12.99/ft. Location: State of Wyoming, USA Quantities Available 12″ SDR 17 PIPE 15,000 ft. All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose…
-
8″, 10″, and 12″ SDR 17 HDPE Pipe
For sale: 8″, 10″, and 12″ SDR 17 HDPE Pipe located in the United States. Available in 40′-50′ sections. Some pieces have flanges and back up rings. Location: State of Florida, USA Quantities Available 8″ SDR17 HDPE PIPE 400 LF $5.00/ft 10″ SDR17 HDPE Pipe 750 LF $9.00/ft 12″ SDR17 HDPE Pipe 25,500 LF $10.00/ft…
-
18-inch HDPE “Polypipe” SDR 17
Quantity Available: 2,800-feet of 18-inch SDR 17 Pipe. This pipe was used to transport potable water. Very clean pipe. Low pressure fiberglass couplings available. Location: State of Mississippi, USA USD 41.17 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 18-inches 457.2 mm Pipe ID (Nominal) 15.755-inches 400.177 mm Wall…
-
12-inch SDR 11 Polyurethane Pipe (HDPE, Polypipe)
Quantity Available: 35,000-feet in 50-foot lengths. Pipe has been fused for fresh water service. Sold only by the truckload. Minimum purchase of 2,400 ft (one truck load). Location: State of Texas, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
10-inch SDR 32.5 HDPE Pipe
Quantity Available: 2,200-feet of 10-inch SDR 32.5 in 50-foot lengths (44 pieces). Location: State of Illinois, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05 mm Pipe ID (Nominal) 10.048-inches 255.22 mm Wall Thickness (Nominal) 0.331-inches 8.407 mm Weight…
-
6-inch SDR 32.5 HDPE Polypipe
Quantity Available: 1,000-feet of 6-inch SDR 32.5 Pipe. 50 pieces in 20-ft lengths with Gheen fittings. Location: State of Illinois, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 6.625-inch 168.275-mm Pipe ID (Nominal) 6.2-inch 157.48 mm Wall Thickness (Nominal) 0.204-inch 5.182…
-
10-inch SDR 17 HDPE (Polypipe)
Quantity Available: 4,500-feet most in 50-ft sticks. Used one time. Location: State of Florida, USA USD 11.77 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot 8.76-pounds 4 kg Standard Dimension Ratio (SDR) 17 All…
-
2-inch SDR 7 HDPE Pipe
Quantity Available: 50,000-feet most in 40-ft sticks. Unused stock. Location: State of Colorado, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 2.37-inches 60.2-mm Pipe ID (Nominal) 1.66-inches 42.2-mm Wall Thickness (Nominal) 0.339-inches 8.6-mm Weight Per Foot 0.95-pounds 0.4 kg …
-
10-inch SDR 17 Stub Ends with Flanges
Approximately 98 stub ends with flanges. Location: State of Oregon, USA USD 75.00 per end
-
20-inch SDR 9 HDPE Pipe
Quantity Available – 1250-ft. Pipe in good condition. Location: State of West Virginia, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 508 mm 20 inches Pipe ID (Nominal) 387.60 mm 15.29 inches Wall Thickness (Nominal) 56.39 mm 2.22 inches Weight…
-
14-inch SDR 13.5 HDPE Pipe
Quantity Available: 14,200-feet of 14-inch SDR 13.5 Pipe in 50-foot lengths. Location: State of Wyoming, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 14-inches 355.6 mm Pipe ID (Nominal) 11.80-inches 299.72 mm Wall Thickness (Nominal) 1.037-inches 26.34 mm Weight Per Foot 18.52-pounds 8.40 kg Standard Dimension Ratio (SDR) 13.5 All…
-
20-inch SDR 11 HDPE Pipe
Quantity Available – 500-ft. Pipe in good condition. Location: State of West Virginia, USA USD 35.30 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 508 mm 20 inches Pipe ID (Nominal) 410.11 mm 16.146 inches Wall Thickness (Nominal) 46.18 mm 1.818 inches Weight Per Foot 45.20 lbs per foot…
-
4-inch SDR 9 HDPE Pipe (Polypipe)
Quantity Available: 29,500-feet in 500 foot rolls. Unused Surplus. 4-inch reinforced DR9 PE4710. Location: State of Texas, USA USD $3.38 per foot
-
18-inch SDR 15.5 HDPE Pipe
Quantity Available – 6,000-feet of 18-inch SDR 15.5 Pipe in 50-foot pieces. Minimum 3,000-ft per purchase. There are approx. 10 normal flanges on the pipe. The pipe was used for dredging, but has very little internal wear. There are almost no welds in the pipe and handling scuffs and scrapes are generally light. Can load…
-
10-inch SDR 17 HDPE Pipe
Quantity Available: 13,000-feet in approximate 40-foot lengths. Location: State of New Jersey, USA USD 8.25 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot 8.76-pounds 4 kg Standard Dimension Ratio (SDR) 17 All details on…
-
26-inch SDR 11 HDPE Pipe (High Density Polyurethane)
Quantity Available – 850-feet of 26-inch SDR 11 HDPE Pipe. 21 pieces of 50-foot length and 14 pieces of 20-foot length. The pipe is used in good condition with minor scratches due to handling. Was used for water line construction. Location: State of California, USA USD 29.42 per foot Principal Dimensions and Characteristics Material High…