-
Not Currently Available: 883 m3 Trailing Suction Hopper Dredger
Built in 1965 in the UK and will be delivered under fresh Phoenix Class. The dredger has a dredging depth of 26m. Discharge is via bottom door. Cargo load time is 5000 m3/hr and has a hold capacity of 883 m3. The dredger has an overall length of 62.17m, breadth of 58.03m and depth of…
-
450 m3 Grab Bucket Loading Split Hopper Dredger
Built 1984 in France the 450 m3 split hopper dredger has a maximum dredging depth of 20 m (65.62-feet). The crane is a Liebherr Type B16/14-16VG with a 6.4 m3 bucket. It is powered by 2 Baudouin engines with total power of 1059 kw. Length is 52.5m, beam is 12.0m and has a draft of…
-
Not Available: Bucket Wheel Dredger and matching Hopper Barge Set
Available for charter or sale. The dredger has a dredging depth of 18m and can be extended to 24m. Bucket capacity is 775lt. The output rate is 750 m3/h. It is powered by 2 engines both full overhauled in 2021. The dredger has a length of 80.17m, a breadth of 14.42m and a depth of…
-
2,300 m3 Crane Loading Split Hopper Dredger
Approx. 2300 m3 split hopper dredge. The dredge has a Liebherr HS895HD crane with 200 T lift capacity with arm of 41 m that can operate up to a max depth of 22 m (can be increased up to 50 m). The crane is fitted with 2 hydraulic grabs : one grab with a capacity…
-
1,800 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1983 in The Netherlands, this 1,800 m3 trailing suction hopper dredger has a dredging depth of 30 m and a suction pipe diameter of 60 mm. Powered by Wartsilla, SW260 engine with controlled pitch propeller and electric bow thruster. The dredger length is 89.97 m , width is 12.45 m and the loaded…
-
1365 m3 Trailing Suction Hopper Dredger w/ Rainbowing
This Trailing Suction Hopper Dredger has 2 x 460 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 600 mm (24-inch). The hopper can hold a max of 1365 m3 (1,785 yd3) and can unload via hydraulically operated bottom doors, pump ashore installation or rainbow installation capable 45° ± 35 m ashore. …
-
522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out
This 522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out was specially built in the Netherlands in 1965, was rebuilt in 1989 and has been modified several times since. Location: The Netherlands Principal Dimensions and Characteristics Year Built/Rebuilt: 1965 / 1989 Length: 72.65 m 238-feet Width: 7.12 m 23-feet Height:…
-
1,000 m3 Trailing Suction Hopper Dredger w/ Side Casting
This 1,000 m3 Trailing Suction Hopper Dredger w/ Side casting was built in 1978 in Japan. It’s Classification Society / Notation is KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger. Located in the Black Sea Dimensions and Characteristics Year Built: 1978 Classification Society: KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger Length…
-
Not Available: 27,000 m3 Trailing Suction Hopper Dredger (TSHD)
This Vessel has the function of the Dredging capacity which is 11,500m3/Hr pump from 15m~60m, and the Discharge capacity which is Dumping Conical Valve system, Shore delivery system(4,000m3/Hr), and Rainbow system. The dredger is 206.75 m (677.5-feet) in length with a draft of 12.351 m (40.5-feet). This Vessel was converted from 54,000 Ton Class Grain…
-
SOLD: 120 m3 Hopper Dredger with 2 m3 Grab
This is a modern, compact and efficient self-propelled grab hopper dredger. Equipped with a 360 degree azimuth propulsion unit, self-elevating spud legs and a shallow draft, she is highly maneuvrable vessel able to dredge in more confined hard to reach areas. Operating with a small crew she is an efficient choice for smaller dredge requirements…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
