-
Not Available – 24-inch Connectra Pipe Fusion Machine 620SC
Connectra 620SC Fusion machine is trailer mounted on 2 axle trailer. The machine can fuse 24-in down to 8-in. It is powered by a 20.0 hp Honda engine. Pipe inserts not included. Machine is in running condition and is being sold “As Is Where Is”. Location: State of Florida , USA Dimensions and Characteristics Make/Model:…
-
Sold – 200KW Semi Trailer Mounted Genset
Pipe Info 200kW Semi Trailer Mounted Genset for sale. Everything works and it runs good Trailer has clean title Price: $16,000 Our support equipment inventory changes weekly. If you don’t see what you’re looking for, please call Justin at +1 (281) 248-8158 or email us.
-
Sold – Kohler 66KW Open Skid Genset with Trailer
Pipe Info Kohler 66KW Open Skid Genset with trailer. Engine hours: 3,662.5 No known issues. Runs and operates as it should New dual axle trailer Price: $6,500 Our support equipment inventory changes weekly. If you don’t see what you’re looking for, please call Justin at +1 (281) 248-8158 or email us.
-
Sold – 8,000 Gallon Fruge Fuel Tanks
8,000 Gallon Fruge Fuel Tanks for sale (4 available). Located in Texas. They measure 4 ft. x 6 ft. x 46 ft. Each tank will hold 8000 gallons single wall ¼ thick steel All 4 tanks have hatches and vents Price: $5,500/each Our inventory changes weekly. If you don’t see what you’re looking for, please…
-
SOLD: 18-inch Pipe Fusion Machine, McElroy Model 618
The Rolling 618 is designed to fuse 200 to 450mm (8”-18”) polypropylene pipes and fittings. The fusion machine is equipped for 14″ pipe. It has a 4-jaw carriage and is self contained gas powered. The 4-jaw carriage that can be easily removed for fusion operations remote from the vehicle. For installations in limited space, the…
-
Not Available: 15 lbs/min Complete Portable Polymer Preparation System
This 15 lbs/min Complete Portable Polymer Preparation System is designed to prepare up to 15 lbs/minute of active polymer in a dry form. The system is installed in three (3) sea containers and is designed to make down polymer at a 0.5% solution into five (5) mixing/aging tanks. The system contains four (4) feed pumps…
-
Not Available: 20,000 gallon Fiberglass Storage Tanks (used for Polymer)
There are five (5) 20,000 gallon Fiberglass Storage Tanks (used for Polymer) available for purchase. Location: State of New York, USA Dimensions and Characteristics Description Five (5) Fiberglass Storage Tanks: Size: 4.27 x 5.36 m 14 x 17.6 feet Capacity: 75,708 liters 20,000 gallons Features Fiberglass construction 21 feet (6.40 m)…
-
Not Available: 4 pcs – 6,000 Watt Portable Light Towers, 65 feet-high
4 pcs – 6,000 Watt Portable Light Towers, 65 feet-high. They can be sold separately or together. Location: State of New York, USA Price is for each Dimensions and Characteristics Extended Height: 19.81 m 65 feet Length: 9.94 m 32.6 feet Width: 2.44 m 8 feet Depth: 2.62 m 8.6 feet…
-
Sold : 1,000 HP Schottel Z-drives reconditioned – 6 available
These 6 reconditioned 1,000 HP steerable Schottel Z-drives are Model SRP 505. All equipment has been stored and packed in certified open top containers for direct delivery worldwide. Located in the Netherlands Price is for total package – en-block: Principal Dimensions and Characteristics 6 Reconditioned Shottel Rudder Propellers SRP 505 Steerable Z-Drives: Type: SCHOTTEL SRP…
-
Not Available: Triple Drum Skagit Winch Model B-20
This Winch was built in the late 1940’s and has no power currently. It takes 1″ wire cable and has never been used. It needs refurbishing. Location: State of California, USA All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or…
-
Not Available: 2 m (6.5-foot) Belt Press
This 1997 Parkson 2 meter belt press was Refurbished Like New In 2002, and has very low hours since then. It currently has new belts installed. It is situated on a 53′ semi-trailer. The press is set up at a wastewater facility in GA and can be demonstrated. Located in The State of Georgia, USA…
-
Not Available: Amphibious Undercarriage for 12-14 Tonne Class Excavators
An amphibious excavator, also known as a marsh buggy, is an excavator specifically designed to maneuver in marshes, swampy areas and soft terrain, as well as to float on water. The physics behind the amphibious excavator lies in the hermetically sealed pontoons, designed based on Archimedes’ principle. Coupled with its large foot print, this creates…
