-
Not Available: Bucket Wheel Dredger and matching Hopper Barge Set
Available for charter or sale. The dredger has a dredging depth of 18m and can be extended to 24m. Bucket capacity is 775lt. The output rate is 750 m3/h. It is powered by 2 engines both full overhauled in 2021. The dredger has a length of 80.17m, a breadth of 14.42m and a depth of…
-
18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi 8DC-61C Crane
6 m3 Grab Bucket Dredger was built in 1988. The dredge has a length of 33.62 m, a breadth of 16.0 m and depth of 2.50 m. The crane is a P & H FD600 with a capacity of 85 tons. Boom length is 32.0 m. Dredging capacity is 480 m3/h. The main engine is…
-
750 m3 Per Hour Bucket Ladder Dredger
This Chain Ladder Dredger was built in 1975 in Germany. It has a capacity of 750 m3/h. It is classified as RRR (Russian River Register) KM*L2 R3-AUT2 EPP Dredger and can navigate 200 miles from shore. Location: North-West Russia General Year Built / Where Built: 1975 / Germany …
-
12 m3 Excavator Dredge Hitachi EX1900-6
Dredge was built in 2018 in Korea and is registered in Panama. The excavator is a 2014 Hitachi. The dredge has 3 spuds of which one is a tilting spud each with a lengths of 30 m, diameter of 1,300 mm and speed of 8~11 m / min. GT is 516 tonnes. Maximum dredging depth…
-
900 m3 Self Propelled Split Hopper Backhoe Dredger
In progress vessel. Requires 3 months to complete. The 900 m3 hopper has a hydraulic splitting mechanism. The cargo capacity is 1100 T. The vessel is 63.50 m in length and 11.36 m in breadth. The main engine is 2 Cummins- NTA 855 with 400 hp each. Vessel can be purchased with or without a…
-
337 Bobcat Excavator mounted on Amphibious Undercarriage
This 337 Bobcat Excavator mounted on Amphibious Undercarriage was built in 2009 and currently has 5,274 runtime hours. The undercarriage is constructed of Corten steel with coal tar paint on the outside and inside of the pontoons. It has stainless steel inspection plugs, hydraulic lines and cylinders. It is also equipped with keyless ignition and…
-
950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab
This 950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab was built in 2006 and the Classification Society is Inspeccion de Buques de la Direccion General de la Marina Mercante (Spanish Local Class). The vessel was last dry docked in the summer of 2015 for approx. 80/90 days in Spain. New navigation equipment was…
-
SOLD: 8-inch Swinging Ladder Dredge Ellicott 360 “Dragon”
Built in 2012 with total hours on dredge of 7,000. Powered by a 375 hp John Deere Motor with 1,000 runtime hours. Dredge Pump is an 8-inch Metso pump (new) with suction diameter of 8-in and discharge diameter of 8-in. Cutter diameter id 31.5-in.. Pump capacity of up to 2,500 gallons “GPM” Location: State of…
