-
Not Available: 750 m3 Per Hour Bucket Ladder Dredger
This Chain Ladder Dredger was built in 1975 in Germany. It has a capacity of 750 m3/h. It is classified as RRR (Russian River Register) KM*L2 R3-AUT2 EPP Dredger and can navigate 200 miles from shore. Location: Northwest Russia General Year Built / Where Built: 1975 / Germany …
-
Not Available: 18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
Not Available: 300 mm (12-inch) Submersible Pump, Damen DOP 3025
This Damen 3025 is a hydraulically driven, submersible dredge pump with wear resistant pump parts. Maximum working depth for the standard executed DOP pump is -40 meters. A protective casing, made of steel, is surrounding the dredge pump and drive. The hydraulic motors and gearbox are suitable for continuous operation under and above water level.…
-
Not Available: 2,500 m3 Self-Propelled Hopper Barge
This listing is for a 2,500 m3 capacity Split Hopper Barge with twin fixed pitch propellers. This vessel was designed for a trailing suction hopper dredger. But the suction system is not installed. It is operated as a dumping door barge. There are 16 bottom doors which are operated by two electric controllers near front…
-
Not Available: 1870 kW (2508 hp) Twin Screw ASD Harbor Tug
Class Society and Notation of Croatian Register of Shipping 90A2 4 (coastal service) Tug. The tug is 32.11 m in length and has a beam of 8.8 m. It is powered by 2×Niigata (6L25CXE) engines. Main propulsions is ASD. Bollard pull ahead is 40 MT and astern is 35 MT. Flag: Liberia Location: Black Sea General…
-
Sold – 128 m3 New Non-Propelled Split Hopper Barge
New Barge – Just used for testing. Built in 2020. The 128 m3 hopper capacity has a load capacity of 150 tons. Barge opening system is with hydraulic actuators – Iveco diesel hydraulic unit new with 150hp. Length is 24.146 m and width is 7.520 m. Location: Northern Europe General Built: 2020 Dimensions and…
-
Not Available: 15 m3 Grab Dredger
770 GT Grab Dredger built in 1979 in Japan. It has a length of 49.94 m, breadth of 19.0m and depth of 3.5m. The spud is 38m. The SKK-16016 GDT-B crane has a24m boom and can dredge to a depth of 50m. Hoist speed is 65m/min. The bucket is 15m3 x 45 Ton (Light) and…
-
Not Available: 8 m3 Grab Bucket Dredger
646 Gross Ton dredger was built in 1979 in Japan. The crane is a SKK 808GDT-A with a dredging depth of 48m. Bucket size is light : 8m3 / Heavy : 5m3 and Rock breaking hammer of 25 Ton. Main engine is a MITSUBISHI S12A-MPTK with 910 HP x 1,900rpm. Location: South Korea General Year…
-
Not Available: 800 hp Single Screw General Purpose Towing Tug
Single screw tug is powered by a NIIGATA 6MG 20 CX 800hp engine. The tug has a length of 23.90 m, a breadth of 7.0 m and depth of 3.0 m. The tug was built in 1985 in Japan. Location: West Mediterranean Sea General Built Year / Place: 1985 / Japan Dimensions and Characteristics…
-
Not Available – 1,300-Tonne, 150-man Jack Up Barge with DP2
The platform is defined as a self-propelled Jack-up that is designed as according to a GustoMSC type NG-2500X which mainly designated for operation in worldwide ocean environments with sea water depths up to 70 m at all specified weather and the sea conditions stated in specification at that region. The unit is intended to be…
-
Not Available: 8 m3 Clamshell Crane Dredger
318 Ton Grab Dredger built in 1986 in Japan. The dredger’s Class is KST. It is 33.62m in length and 16.0 in breadth and depth of 3.0 m. It has a SKK-1800GDT-A with a max dredging depth of 40m. Bucket size is Light 8m3 and Heavy 6 m3. Hammer (2) is 28 Ton. Engine is…
-
Not Available: 8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
The MC 115D – was designed around the premise of making a durable, productive, transportable, stable, safe, and affordable dredge for entry-level buyers or operations on a budget. The controls can be learned quickly, and maintenance is simple. The system boasts a powerful 125 HP (93 kW) diesel engine, 2,000 GPM (454m3/hr.) dredge pump, and…
-
Not Available: 12-inch Submersible Pump with Agitators Dragflow HY 300B
Comes outfitted with a hydraulically driven mechanical agitators, 250 ft of 10 inch fixed HDPE pipe, includes hydraulic power unit and associated controls. Requires misc. riggings and shackles to operate. Location: State of Oregon, USA Dimensions and Characteristics Model: HY 300B (Serial # 2663) Weight: 3542.6…
-
Not Available: 10-inch Cutter Suction Dredger (CSD)
Fully reconditioned in 2002, the dredger was originally built in 1987. Dredge pump is a Warman with dredging depth of 10m (32.81-ft), a suction diameter of 305 mm (12-inch) and a discharge diameter of 254 mm (10-inch). Delivery of sand is 150 m3/h. The dredger is powered by V16 GM and 6 cylinder DAF with…
-
Not Available: 2,100 hp Single Screw Ocean Going Tug
Built in 1987 in Italy, this tug is recently out of drydock July 2020 with an IACS class (RINA). It is powered by a Wartsila F38A 1 x 1550KW – 840 RPM engine with controllable pitch propeller in Kort steering nozzle. Bollard Pull is 39 tons. Maximum speed is 13 knots and cruising speed is…
-
Not Available: 650 hp Twin Screw Work Tug
Nearly new Main Engines: JD 6090 tier 2 with 650hp. Gears and ration: MG 512 and 3:10. The tug has 2 aft winches. It has a length of 42 feet, a beam of 14.2 feet and a depth of 5.7 feet. Fuel capacity is 500 gallons. Location: State of Oregon, USA General Built: 1953…
-
Not Available: 14-inch Submersible Pump Dredge, Electric Drive
Pontoon mounted submersible pump with cutter suction (HY400 with Power Pack) was built in 2016 in Italy. The dredge pump has a capacity of 1200 m3/h with a head of 42 m. Dredging depth is 25.0 m. Suction diameter is 1015 mm and discharge pipe diameter is 300 mm. Discharge distance is 1000 mm. The…
-
Not Available: 28 m x 16.2 m x 3 m Heavy Spud Barge
This listing is for a 28 m x 16 m x 3 m Barge with 4-point Mooring. It was built in Lebanon in 1999 and was reconditioned there in 2019. Its’ Classification Society and Notation is IROS (International Register of Shipping). Barge is currently fitted with a 75 Ton Lima Crane and a manual grab…
