16-inch Cutter Suction Dredger (CSD) IHC Beaver 40

  • 1,820,000 USD
  • 220210-DB

IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of 955 mm. Cutter drive accepts temporary overload, resulting in high maximum cutter power.

Location: Malaysia

General Information
  Built: 2018  
Principal Dimensions and Characteristics
  Length overall (ladder raised): 20.5 m 67.26-ft
  Length over pontoons: 13.41 44-ft
  Breadth: 5.72 m 18.77-ft
  Depth: 1.51 m 5-ft
  Side pontoons: 11.0 x 1.47 x 1.47 m 36 x 4.8 x 4.8-ft
  Mean draught full bunkers: 1.10 m 3.6-ft
Dredge Pump
  Make/Model: IHC 900-175-350, single-walled
  Engine Type: Caterpillar C18 TA Acert
  Heavy duty engine power @1800 rpm: 483 kw 648 hp
  Maximum dredging depth: 8.0 m 26.25-ft
  Suction Diameter: 390 mm 15.35-in
  Discharge Diameter: 390 mm 15.35-in
  Swing Width with 35 degree swing each side
    Max dredging depth: 18.0 m 59-ft
    Min dredging depth: 22.5 m 73.8-ft
Electrical Installation
  Voltage: 24V DC
  Battery capacity: 260AH  
  Type: IHC Lancelot 955-50
  Power at Shaft: 55 kW 74 hp
  Speed (max): 35 rpm
  Diameter: 955 mm 37.6-in
Ladder and Swing Winches
  Line Pull, first layer: 40 kN  
  Maximum Line Speed: 25m/min 82-ft/min
  Wire Diameter: 16 mm .63-in
  Drum Diameter: 326 mm 12.8-in
  Swing wire length: 100 m 328-ft
  Anchor weight: 240 kg 529 lbs
  Length: 11.0 m 36-ft
  Diameter: 368 mm 14.5-ft
  Weight: 1369 kg 3018 lbs
Spud Hoisting Cylinders
  Force: 60 kN  
  Spud stroke (each time), approx: 3.1 m 10.2-ft
Deck Cranes
  Lifting power: 15 kN  
  Outreach: 2.8 m 9.2-ft
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice