-
20,60 m Pusher
20,60 m. Pusher available for sale. Engine had major repair work done in 2018. Location: Germany Quick Overview Vessel Type: Pusher Registry: Germany (ZSUK) – Unionszeugnis Year of Build: 1973 Shipyard (Pontoon): Hilgers AG, Rheinbrohl, Germany Length: 20,60 m Width: 6,82 m Draft: 1,76 m Main Engine: Schottel SRP 150 DB OM424A (12 Cylinder) /…
-
1977 Single Screw Tug
Built in 1977 this single screw tug has a Bollard Pull of 35 t. Location: Northern Europe General Information Built: 1977 / Italy Hull material: Steel Flag: PALAU Class Society: RINA Class C Tug, Unrestrict. Nav. Next SS:09/2025 Principal Dimensions Length Overall: 27.06 m Breadth: 8.41 m Depth: 4.41 m NT:…
-
New 2024 21 m Twin Screw Tug
This 21 m tug was built in 2024 in Greece. equipped with an open deck loading area and loading Crane. All equipment installed new on 2024. Location: Eastern Mediterranean General Information Built: 2024 / Greece Hull material: Steel Flag: Greece Class Society and Notation: Phoenix Hellenic Register Price: POA Principal Dimensions Length Overall: 21…
-
38.15 m Single Screw Tug (Nordic)
The vessel is equipped and fitted for the following contingency services: Harbor and Escort towage, Towing, and Salvage. Location: Nordic General Information Built: 1975 / United Kingdom Hull material: Steel Flag: Norway Class Society: DNV-GL Class Notation: +1A1 Tug E0 A2 trading area Latest Class renewal 2023 Last dry dock October 2023 Principal Dimensions …
-
120 ft. Offshore Supply Support Vessel For Charter
120 ft. offshore supply vessel for charter. Built in 1980 in the United States. Location: Northern Europe Principal Information Length Overall: 36.8m / 120.73 ft Built: 1980 USA Hull Material: Steel Flag: San Marino Class Society and Notation: RINA Supply Vessel, Unrestr. Navig. Next SS: 07/2025 Breadth: 8.38m Draft: 3.42m NT: 85 tons GT: 284…
-
19m Steel Workboat For Sale
19m workboat with steel hull. Built in Egypt in 2024. Located in the Eastern Mediterranean. Two engines new 0 hours, Two generators new 0 HOURS, 50 KW EACH ONE PROPELLERS 98 CM EACH ONE, SHAFT 90 MM. Engines controlled from bridge and full alarm system in engine room (8 CAMERAS). GEARBOX ADVANCE 300 RATIO 3:1…
-
710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
294 hp Single Screw Work Boat
Built in 1969 and in 2016 was rebuilt with 600,000 euros of improvements. The vessel has a free deck area of 72 m2 (86 yd2) and hopper cargo area of 600 tons. Next Dry dock is October 2020 and next Annual Survey is October 2019. It has a Classification of Local Ship Inspectorate Harbor. Flag:…
-
550 hp Multi-Purpose Work Boat For Sale and Charter
This 550 hp Multi-Purpose Work Boat was built in 2005 and it’s Classification Society and Notation is INSB (International Naval Surveys Bureau), Sailing area: Full European up to 20 miles from a safe haven. Flag: Cyprus Located in Northern Europe Principal Dimensions and Characteristics Year Built: 2005 Make/Model: Multicat Classification Society/Notation:…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
5,460 hp, 210-foot DP2 Multipurpose Supply Vessel
Multipurpose Supply Vessel satisfies the general requirements of the deep water offshore industry. KONGSBERG SIMRAD dynamic positioning SDP 21 system allowing: Automatic tracking, dynamic positioning, automatic speed control, submarine (ROV) auto-tracking. The vessel has a deadweight of 2370 mt. Accommodations for 30 persons and Mess / Dry rooms, Laundry, Galley, Stores, Office, Fully Air- conditioned…
-
26.6 m Survey and Salvage Boat
Class is currently MCA Cat 2 60 nm Offshore but could be changed to Cat1, up to 150 nm offshore. It is equipped with bow thrusters. It has a reverse osmosis plant, full catering facilities and a full compliment of electronics equipment including Inmarsat. On deck it has a HIAB, survey winch A-Frame and diving…
-
1360 hp Crew Boat Wind Farm Vessel
Built in 2012 and refitted in 2017, this Crew Boat / Wind Farm Vessel has 2 Caterpillar engines with total power of 1360 hp. It’s maximum speed is 25 knots and cruising speed is 22 knots. It has seating for 3 crew members and 12 passengers. It’s Class Society and Notation is MCA Cat2 –…
-
700 hp Work Boat w/Deck Crane “NEW BUILD”
This 700 hp Work Boat w/Deck Crane is a New Build and is ready for inspection and delivery. Flag: Cyprus Located in Cyprus Also for Charter Principal Dimensions and Characteristics Year Built: New Build Hull Material: Ukrainian Steel Over All Length: 12.00 m 39 feet Breadth: 6.00 m 20 feet…
-
1,658 2014 Multi Purpose Work Boat
This 1,658 2014 Multi Purpose Work Boat was built in 2014 in Spain and its Classification Society and Notation is RINA (Registro Italiano Navale), Unrestricted – C TUG-AUT–UMS. Its next Dry Docking is due in October, 2016, its next Special Survey is due in October, 2019 and the next Annual Survey is due in October,…
-
1,200 hp Shallow Draft Tug for Charter in West Africa
This Vessel was built in 2011 in Istanbul, Turkey and its Classification Society / Notation is RINA C+Hull + Mach., Coastal Area. The vessels basic functions are harbor towing, mooring and pushing operations Flag: Nigerian Located in Nigeria Dimensions and Characteristics Year Built:/td> 2011 Classification Society / Notation: RINA C+Hull + Mach., Coastal Area…
-
SOLD: 1,070 hp Triple Screw Multicat Type Work Boat
This listing is for a 1,070 hp Triple Screw Multicat Type Work Boat w/ 25-tonne Deck Crane was built in Turkey in 2012 and was renovated in 2018. Its’ Classification Society and Notation is PHRS (Phoenix Register of Shipping). Its’ next Dry Docking and Special Survey is scheduled for January of 2020. Flag: Turkey Location:…
-
SOLD: 546 hp Twin Screw Workboat w/ A-frame Hoist
Multicat workboat built in 2014 in Egypt. Class BV Coastal 20 nm offshore. Powered by 2 x Caterpillar 3406 6 cyl with total power of 546 hp. The workboat is 24.0 m in length and has a breadth of 8.0 m. Free deck space is 96 m2. It has an Hydraulic Crane with 4.5 tons…
