-
SOLD: 12-inch Booster Pump
This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge Diameter: 305 mm 12 inches Suction…
-
SOLD: Impeller and Inlet Liner for Thomas 10 x 12-inch J30 Pump
This listing is for a brand new impeller and suction liner for a Thomas 10-12 series 30 dredge pump. Part numbers/description: Pump Impeller H30,LH3V30.0TD4.00-.333P,D Inlet Liner H#) Mark III Armor-LOK GPS80 Location: Canada
-
SOLD: 900 hp Twin Screw Pushboat (Towboat)
Powered by 2 x 12V71 Detroit engines with total of 900 hp. Engines have approx. 5000 work hours. Towboat has a length of 56-ft, width of 22-ft and depth of 8-ft. Fuel capacity is 9000 gallons. Boat is fully functional – engines ran smoother and quietly, tug neat and clean. Complete support equipment is included.…
-
SOLD: 26-inch SDR 11 HDPE Pipe (High Density Polyurethane)
Quantity Available – 850-feet of 26-inch SDR 11 HDPE Pipe. 21 pieces of 50-foot length and 14 pieces of 20-foot length. The pipe is used in good condition with minor scratches due to handling. Was used for water line construction. Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe…
-
SOLD: 17-inch, HDPE Polypipe 1.1-inch Wall SDR 15
Quantity available: 141 feet in various lengths. Pipe lengths are 2-50 foot length, 1-22 foot length and 1-19 foot length NOT AVAILABLE 2 pcs 50-foot long 1 pcs 22-foot long 1 pcs 19-foot long TOTAL 141-FEET Location: State of Florida, USA
-
SOLD: 10-inch Disch. Horizontal Cutter Dredger IMS Model 4010
Built in 2001. Designed and built by IMS, this 177 horsepower unit was made as a self-contained and portable hydraulic power source. The primary purpose of the power unit is to furnish high-pressure fluid to power the hydraulically driven IMS pumping system. The Murphy hour meter reads 641 hours. The dredge is in complete running…
-
SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive
Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA
-
SOLD: 8-inch Horizontal Cutter Dredge – VMI Model 815
This listing is for an 8-inch Horizontal Cutter Dredge that was built in 2014. It has approximately 1,192 run time hours and was only used for one job. Location: Texas, USA Principal Dimensions and Characteristics Year Built: 2014 Serial Number: 824 Length: 11.73 m 38.6 feet Height (without A/C): 2.69 m…
-
SOLD: 8.0 m3 (10.4 m2) Clamshell Dredge
This listing is for a 10.4/8.0 cu-yd Clamshell Dredge that was built in 1992. It can be used as a marine crane for piling and heavy lifting, as well as a dredge. Flag: Mexico Location: Mexico Principal Dimensions and Characteristics Year Built: 1992 Hull Material: Steel Length Over All: 41.80 m 137.13…
-
SOLD: 3-inch SDR 11 NEW HDPE Pipe
16,120-feet of New 3-inch SDR 11 Pipe in 40-foot lengths. Location: North Dakota Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 3.50-inches 88.9 mm Pipe ID (Nominal) 2.826-inches 71.780 mm Wall Thickness (Nominal) 0.318-inches 8.077 mm Weight Per Foot 1.38-pounds 0.626…
-
SOLD: 3-inch SDR 7 NEW HDPE Pipe
Quantity Available: 3,720-feet of New 3-inch SDR 7 Pipe in 40-foot lengths. Location: State of North Dakota, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 3.50-inches 88.9 mm Pipe ID (Nominal) 2.44-inches 61.976 mm Wall Thickness (Nominal) 0.50-inches 12.7 mm Weight Per Foot 1.97-pounds 0.894 kg Standard Dimension Ratio (SDR)…
-
Not Available: 16-inch SDR 17 HDPE Pipe
his is some used 16-inch SDR 17 HDPE Pipe for sale and it has approx. 10 to 20 percent wear. Located in the State of Michigan, USA Approx. 1,900 feet Available All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or…
-
Not Available: 10-inch HDPE Pipe
Used 10-inch dredge pipe in approx. 40-foot lengths. approx. 2,000 Linear feet available Located in the State of South Carolina, USA All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are…
-
SOLD: Mud Cat Weed Harvester
This Mud Cat Weed Harvester is a Model #H5220 and comes with a trailer. Located in the State of Missouri, USA Principal Dimensions and Characteristics Length: 10.06 m 33 feet Width: 3.54 m 11.6 feet Cutting (Width x Depth:) 2.13 m x 1.83 m 7 feet x 6 feet Weight: 7,000 lbs. Paddle Wheel…
-
SOLD: Surplus 16 in. SDR 9 Pipe
New, Surplus 16 in HDPE SDR 9 pipe available. Neve Used. Location: Texas Dimensions and Characteristics Material: High Density Polyurethane (HDPE) SDR: 9 Quantity Available: 2,100 ft. Price: $18.40/ft. Other: 50 ft. sections Our inventory changes weekly. If you don’t see what you’re looking for please…
-
SOLD: Dock Barge with 7543 Tiger Crane
Dock / deck barge with 7543 Tiger Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 115 Yamaha Outboard Crane Information Model: 7543 Tiger Crane with Power Pack Elevated Helm Hydraulic Cat Head 2 Spuds Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873…
-
Not Available: 16-inch Maddox Booster Pump
16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA Our inventory changes weekly. If you don’t see what you’re looking for please give us a call…
-
SOLD: 500 hp Dredge Cutterhead Module For 22-inch Dredge
48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA Dimensions and Characteristics Cutter Diameter: 1219 mm 48-inch Hydraulic Gearbox: 373 kW 500 hp Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225)…
