Dredging Equipment – Dredge Brokers





Filters
Search

Category

Location

  • 1985 Mudcat by Ellicott Machine Corp dredge Model 815

    1985 Mudcat by Ellicott Machine Corp dredge Model 815

    • 40,000 USD
    • 240508-DH
    • Location: Ohio

    1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA

  • 1998 VMI 815 8″ Auger Dredge

    1998 VMI 815 8″ Auger Dredge

    • 95,000 USD
    • 240201-DH

    Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…

  • 10-inch SDR 32.5 HDPE Pipe

    10-inch SDR 32.5 HDPE Pipe

    • 230406-PP

    Quantity Available: 2,200-feet of 10-inch SDR 32.5 in 50-foot lengths (44 pieces). Location: State of Illinois, USA           Principal Dimensions and Characteristics   Material High Density Polyurethane (Black)   Pipe OD (Nominal) 10.75-inches 273.05 mm   Pipe ID (Nominal) 10.048-inches 255.22 mm   Wall Thickness (Nominal) 0.331-inches 8.407 mm   Weight…

  • 6-inch SDR 32.5 HDPE Polypipe

    6-inch SDR 32.5 HDPE Polypipe

    • 230506-PP

    Quantity Available: 1,000-feet of 6-inch SDR 32.5 Pipe. 50 pieces in 20-ft lengths with Gheen fittings. Location: State of Illinois, USA           Principal Dimensions and Characteristics   Material High Density Polyurethane (Black)   Pipe OD (Nominal) 6.625-inch 168.275-mm   Pipe ID (Nominal) 6.2-inch 157.48 mm   Wall Thickness (Nominal) 0.204-inch 5.182…

  • 6-inch Horizontal Cutter Dredger “Dino 6”

    6-inch Horizontal Cutter Dredger “Dino 6”

    • 94,500 USD
    • 230505-DH

    This 6-inch Horizontal Cutter Dredger was built in 2013, and has 3600 total runtime hours. It has been modified with longer and wider pontoons, a cab, and a transom which can hold 2 outboard motors. It has a new cutterhead, boom, and cable system that was used on 1 small job after it was installed.…

  • 15 m3 Duty Cycle Bucket Dredge and 4000 cu/yd Dump Scow

    15 m3 Duty Cycle Bucket Dredge and 4000 cu/yd Dump Scow

    • 11,700,000 USD
    • 230103-DG

    The dredge hull was built in 1999. The crane was built in the 1960’s and had a complete rebuild 2021 and 2022. The dredge is a conventional configuration, all welded steel construction, single skin, non self-propelled deck barge which is outfitted for dredging operations. The vessel is set up to be worked on (3) spuds,…

  • Dragflow HY 400B Submersible Pump w/ Cutters

    Dragflow HY 400B Submersible Pump w/ Cutters

    • 216,700 USD
    • 230700-CP

    Built in 2014, worked for only one shift then project cancelled. Huge inventory of spare parts including impeller and housing. The pump has a capacity of 1020-1150 m3/h and motor power of 300-410 hp. The main body is spheroidal cast iron GS500 and main shaft is austempering NiCrMo4 Steel. The cutter is a Hydraulic excavator…

  • 10-inch SDR 17 HDPE Pipe

    10-inch SDR 17 HDPE Pipe

    • 230408-PP

    Quantity Available: Between 10,000-12,000-ft of 10-inch SDR 17 Pipe in 40-foot sections. Pipe can be banded for transportation. Location: State of New Jersey, USA USD 8.25 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot…

  • 20 inch Ellicott Dredge 1870

    20 inch Ellicott Dredge 1870

    • 3,077,000 USD
    • 221108-DB

    Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…

  • 12-inch SDR 11 Polyurethane Pipe (HDPE, Polypipe)

    12-inch SDR 11 Polyurethane Pipe (HDPE, Polypipe)

    • 230503-PP

    Quantity Available: 35,000-feet in 50-foot lengths. Pipe has been fused for fresh water service. Sold only by the truckload. Minimum purchase of 2,400 ft (one truck load). Location: State of Texas, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…

  • Pipe Floaters for 16-inch IPS pipe size

    Pipe Floaters for 16-inch IPS pipe size

    • 230803-PF

    45 pairs of un-used, Neptune PF16-400-R 16” Floats. Location: State of California, USA

  • 10-inch SDR 17 Stub Ends with Flanges

    10-inch SDR 17 Stub Ends with Flanges

    • 230204-VM

    Approximately 98 stub ends with flanges. Location: State of Oregon, USA USD 75.00 per end

  • 18-inch HDPE “Polypipe” SDR 17

    18-inch HDPE “Polypipe” SDR 17

    • 230106-PP

    Quantity Available: 2,800-feet of 18-inch SDR 17 Pipe. This pipe was used to transport potable water. Very clean pipe. Low pressure fiberglass couplings available. Location: State of Mississippi, USA USD 41.17 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 18-inches 457.2 mm Pipe ID (Nominal) 15.755-inches 400.177 mm Wall…

  • 8-inch Swinging Ladder Dredge Ellicott 8010-HP

    8-inch Swinging Ladder Dredge Ellicott 8010-HP

    • 321,000 CAD
    • 230100-DL

    Built in 2008, rear “Kicker Spud” propulsion system. Two primary spuds. Hull mounted dredge pump with 8-in suctions and 8-in discharge with an impeller diameter of 19.5-in. Dredge has a minimum dredging depth is 2-ft 4-in and max depth of 15-ft. Powered by a Turbo-charged after-cooled John Deere diesel engine with a power rating of…

  • 12-inch Horizontal Cutter Dredger, IMS 5012

    12-inch Horizontal Cutter Dredger, IMS 5012

    • 370,000 USD
    • 230104-DH

    Built in 2018 and has only 3287 hours. Dredging depth max is 22-ft. Pipe diameter is 12-in. The dredge is self-propelled with IMS patented Starwheel Drive. Cutterhead length is 108-in and diameter is 22-in. Total solid capacity is 260 yds3/hr. Nominal pump capacity is 1,033 yds3/hr. It is one truck transportable (fully assembled). Dry weight…

  • 10-inch SDR 17 HDPE (Polypipe)

    10-inch SDR 17 HDPE (Polypipe)

    • 230105-PP

    Quantity Available: 4,500-feet most in 50-ft sticks. Used one time. Location: State of Florida, USA USD 11.77 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot 8.76-pounds 4 kg Standard Dimension Ratio (SDR) 17 All…

  • 2-inch SDR 7 HDPE Pipe

    2-inch SDR 7 HDPE Pipe

    • 230206-PP

    Quantity Available: 50,000-feet most in 40-ft sticks. Unused stock. Location: State of Colorado, USA           Principal Dimensions and Characteristics   Material High Density Polyurethane (Black)   Pipe OD (Nominal) 2.37-inches 60.2-mm   Pipe ID (Nominal) 1.66-inches 42.2-mm   Wall Thickness (Nominal) 0.339-inches 8.6-mm   Weight Per Foot 0.95-pounds 0.4 kg  …

  • 12-inch Horizontal Cutter Dredge IMS 7012

    12-inch Horizontal Cutter Dredge IMS 7012

    • 395,000 USD
    • 220809-DH

    IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt.…