-
Mounted Dredge Booster Pump
Morris pump 14-12 Motor GM V16 Low Hours Location: Canada …
-
12-inch Damien Submersible Pump and Power Unit
Damien DOP PUMP / 3025 with Power Pack. This Pump was built in 2005 and can be coupled to an excavator, crane or A Frame. It can be used as a deep dredging system and can also be coupled to a booster for greater discharge distance. Pontoons included. Location: Mexico Principal Dimensions and Characteristics Year…
-
Excavator Pump Attachment 6-inch Eddy Pumps
Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Principal Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in…
-
Metso J36 12″ x 12″ Pump
Metso J36 12″ x 12″ Pump Location: State of Nebraska, USA
-
Metso 8″ x 6″ Slurry Pump w/ 50 hp electric drive
Metso 8×6 slurry pump with drive and 50 hp motor. Location: State of Nebraska, USA
-
14-inch Cutterhead Module with Cutterhead and 65 hp drive
Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA
-
Twin Disk MG 518 Marine Gear 2.47/1 reduction
Twin Disc MG 518-1; 2.47 to 1 reduction; sn 3 x 3918; rated 750 hp. Has been inspected and is in very good condition. Location: State of Nebraska, USA
-
SOLD – 10 x 8-inch Booster Pump w/Mack Engine
This listing is for a Lightning XL pump with a Mack 6 cylinder engine. The impeller is worn out. Pump recently painted. Location: state of Texas, USA Principal Dimensions and Characteristics Pump Make/Model: Lightning XL Discharge Diameter: 203.2 mm 8 inches Suction Diameter: 254 mm 10 inches Engine Make / Model: Mack 6 cylinder All…
-
10-inch Booster Pump IMS 1012
The booster has only been used on one project. Impeller and volute cast from high chrome Gasite iron. Discharge diameter is 10-in, suction diameter is 12-in and sphere passage is 5-in. Pump has about 2000 hours Can be purchased as a package with Dredger 200919-DH Location: State of Florida, USA Principal Dimensions and Characteristics Length:…
-
160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
-
14-inch GIW Pump Impeller
Brand new GIW Impeller 14×36 IN 3M 2C4.5 for a dredge pump. The rotation direction is clockwise from the shaft side. The impeller weights 526.17 kg (1160 lbs). Location: Netherlands
-
18-inch Floating Booster Pump
This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…
-
12-inch Booster Pump
This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge…
